ZERO Die Ring Multi-Packs
$100.00 – $200.00
All Multi-Packs include multiple rings (details below) and a die wrench. Finish on all multi-packs will be black nitride. Wrenches are aluminum, so the finish is a black hardcoat anodize.
7/8″ Multi-Pack includes (4) rings, all 7/8×14, and a wrench.
7/8″ Turret-Pack includes (9) rings, all 7/8×14, and a wrench.
1-1/4″ Multi-Pack includes (4) rings, all 1-1/4×12, and a wrench.
Hybrid Multi-Pack includes (2) 7/8×14 rings, (2) 1-1/4×12 rings, and a wrench.
ORDER INDIVIDUAL RINGS >>HERE<<
Through the research and development process for the ZERO, it became a testing bed for MANY reloading products. We needed to isolate variables, and ensure we were testing the press and not just the dies/shellholders/etc. One of the major culprits we found for inconsistency was actually lock rings. MOST lock rings on the market are held into place by a set screw or they’re split/clamp style. We found these to be inconsistent by design, as they needed to secure themselves to the dies for constant removal/replacement in single-stage presses.
NOTE: THESE RINGS CAN NOT BE USED IN EVERY SLOT ON A REDDING T-7, THE RING DIAMETER IS TOO LARGE.
So, we decided to make our own. Here’s where we landed:
- LARGE DIAMETER – more surface contact with the turret head means the ring will align with the press and force the die straight, instead of grabbing onto the die and aligning as it may.
- MORE THREAD ENGAGEMENT – the rings feature .350″ of thread engagement, which is 15-25% more than common die lock rings. This results in roughly a full thread of additional engagement, increasing the ability of the ring to square the die to the press.
- INTERNAL WRENCH ENGAGEMENT – with traditional rings, there is a flat or knurling on the outside, which requires you to get a wrench around the outside to tighten. On a multi-die head this requires you to get tools between dies and fight with the location – or you have to make the ring smaller which has real downsides. This ring is designed with internal wrench engagement, mitigating this issue altogether.
- PRECISION STAINLESS STEEL MANUFACTURING – The threads and bottom face of the ring are machined in a single operation, delivering square surfaces to align your die. We then leave the ring and threads hole and unobscured by splits and grub screws. All rings are made of 17-4PH stainless steel. Available in raw stainless or with a black nitride finish.
Total thickness of rings is .500″ and outside diameter is 1.685″
| Weight | 1 lbs |
|---|---|
| Dimensions | 7 × 4 × 1 in |
| Multi-Pack Type | 7/8" Multi-Pack (4 Rings + Wrench), 7/8" Turret-Pack (9 Rings + Wrench), 1-1/4" Multi-Pack (4 Rings + Wrench), Hybrid Multi-Pack (4 Rings + Wrench) |
| Manufacturer | Area 419 |
165 reviews for ZERO Die Ring Multi-Packs
Related products
Zachary Washington (verified owner) –
Again supper great precise product from Area 419
Lee C. (verified owner) –
Well made and great piece of kit
William K. (verified owner) –
Great system, It is a very nice press. Strong, Stable, and Accurate. I love the shell holder setup very secure. I look forward to loading thousands of rounds on it
Robert Leyshion jr (verified owner) –
Great product. Just remember if you’re using these on a Redding T 7, skip a station between dies.
Tom L. (verified owner) –
excellent quality product – Area 419 well done!
Don Dory (verified owner) –
I really like the lock rings and how you torque them down. I just wish I didn’t have to own three wrenches as the multipack of rings seems to only come with a wrench. Otherwise a nice design.
John Pello (verified owner) –
Love them
KEVIN S. (verified owner) –
Can’t go wrong using this.
William B. (verified owner) –
Area 419 quality, second to none!
Aaron T. (verified owner) –
Nice flat fit and a single too to install
Anonymous (verified owner) –
Love the idea
Michael Shaw (verified owner) –
Very good craftsmanship
Kenneth (verified owner) –
These rings work great, just wish they were a little less expensive for what they are but I understand, you pay for quality and at Area419 quality is what you get every time
Spencer (verified owner) –
Easy to use and set up!
Todd P. (verified owner) –
Great addition to my press.
Christian B. (verified owner) –
As always – these rings are what you need especially if you don’t want to scratch up your turrets.
Patrick Breedlove Sr (verified owner) –
Quality is second to none.
Thanks for building high quality products. I now shop your products first.
Pat B
Michael (verified owner) –
Well made and well packaged for shipping.
Delbert McCord (verified owner) –
These are suppose to be the best because of them being larger so more contact area. I have had a problem with them loosing but I am sure its something I have done.
Drew D. (verified owner) –
Great die rings. Have measured many and these have the most perfectly flat machining surface of them all. They also look great and having the wrench fit inside is such a nice feature. Couldn’t be happier.
Lee C. (verified owner) –
great quality and great product
Tim O. (verified owner) –
Easy to use and makes for a solid connection
lok l. (verified owner) –
Still perfect as the other set I got.
Gabriel Ruiz (verified owner) –
Again, very nice, a little pricy, but nice!
Lee C. (verified owner) –
High quality and well made
William Teel, Ph.D. (verified owner) –
Perfect!
William (verified owner) –
These rings hold my die settings better than any other rings that I have tried.
Rueben Weickum (verified owner) –
Work Great
Frederick Brown (verified owner) –
Beautiful concept/execution
Ken Susnara (verified owner) –
Love them!!
Kyle Rhea (verified owner) –
Love the die rings
Timothy (verified owner) –
As with all area419 products very nice machining and works perfectly with the Zero Press.
Antonio Lara (verified owner) –
Your product is top notch. Make loading a pleasurable experience.
Shawn P. (verified owner) –
Easier to set than any factory ring on the market!
Steve Rigby (verified owner) –
Superb!
Kenneth (verified owner) –
Great product
Joe Ben O’Quinn (verified owner) –
Perfect
Shaun C. (verified owner) –
Wonderful product addition to the zero press.
Derrick Whitten (verified owner) –
Awesome addition.
John Morgan-Hosey (verified owner) –
Great Die Rings, they feel just right.
Dave (verified owner) –
Wrench is a little tight
Brian Reinwald (verified owner) –
Great rings. Hold the dies very securely
Michael (verified owner) –
well made , tighten QC on finish shade
James Tulip (verified owner) –
These rings lock down so hard, even with just finger tight I still had to use the wrench to loose it back up. Will not ever use any other rings after this
Robert Penick (verified owner) –
Verdict is still out, cost vs results
Barry M. (verified owner) –
Well designed and git for purpose
Sean Waldron (verified owner) –
Work great. Look good.
Dan Newton (verified owner) –
Great quality! Very happy with my purchase!
Gregory H. (verified owner) –
Really tight fitting on the lock rings. Almost too tight as it’s hard to get 100% engagement.
William (verified owner) –
Second set for second turret, nothing better.
Alejandro Rodriguez Wilkes (verified owner) –
Work as advised and not much pressure is needed to set the dies perfectly.
Michael Langlois (verified owner) –
These locking rings are seriously superior to normal lokcing rings. They better machined and posses much more contact area than other locking rings.
Mark (verified owner) –
Buy once cry once
Anonymous (verified owner) –
Excellent
Francis L. (verified owner) –
I recently purchased both the zero press for one this thing is absolutely amazing it’s everything you could ever want in a press. But enough about the press the M series die is on another level. Not only did it cut my reloading time in half but the accuracy. Every single case bumped .0025 every time on one cycle. My groups instantly tightened up and I was hitting everything that was it the bullets way.
Sandy S. (verified owner) –
A necessary part and is a great approach to the system.
Tevis Smith (verified owner) –
Works as it should
William M. (verified owner) –
Perfectly flush and true, a must in my opinion if your reloading on the Zero.
Doug Evancic (verified owner) –
Same as above.
Ben Ward (verified owner) –
Do yourself a favor and just get these with the zero
Douglas M. (verified owner) –
Awesome!
James Chisom (verified owner) –
Love this die lock system with the large surface area
Todd Van Dyke (verified owner) –
Works perfectly!
Teofil Gieryn (verified owner) –
Same!!!!!!!
Lance north (verified owner) –
The research and development you put into your product is unbelievable. These rings lock down and there is no movement. Fantastic products you produce.
Anonymous (verified owner) –
These die rings are great . I think I might be over tightening the rings my wrench slipped on the open end . Other than that they are perfect.
Berchman Ortego (verified owner) –
Love them so easy. Just had to learn to just make contact and not add any torque once bottomed out.
John (verified owner) –
Set screw to lock in.
Jan Cremers (verified owner) –
If youre looking for ZERO tolerance, this is the lockring you want!
Mark (verified owner) –
Not the cheapest by any means but a very innovative set of die rings. From an engineering point of view they are a great way to make sure your dies are truly aligned in your press.
Michael R. (verified owner) –
Great!
steve crutchfield (verified owner) –
I really like the positive locking feel of these rings. The only downside is, when you have to remove them to load another caliber, you have to completely set them again.
I know you’ve thought about this, but a smaller diameter jamb nut above the main ring might work, although it may prevent loosening the die from the press. I guess the best solution is to buy another head. I guess resetting a die is a small price to pay for outstanding performance.
Andy H. (verified owner) –
As expected
Michael P. (verified owner) –
Best die ring ever used. Ensures true alignment, and locks solid
Arron Hamilton (verified owner) –
The die rings & wrench are quality made & work well with my zero press
Ian M. (verified owner) –
Great fit and function.
Christopher Baker (verified owner) –
Top Quality as all 419 products
Lawson Smith (verified owner) –
No real comment other than they seem to work great. I still miss the lock screw. It would be nice to save the setting when I do need to move the dies.
John Mallett (verified owner) –
Work of art
Aurelio D. (verified owner) –
Bought the ring pack along with zero press , zero shellholder system, and storage block. Highly recommend all thesee products. I was on the fence about getting these products because of the price. So far I have had these products for a about a month. Set up was a breeze and my reloading session have been pretty enjoyable. I can say without a doubt these products have made my reloading much more accurate and repeatable. Using this setup I was able to find a load for my 30-06 with an SD of 1 and a load for my 308 with SD of 2. Before using the zero press, I felt like I was chasing my tail trying to work up a load.
Anonymous (verified owner) –
love these rings
Robert Wyatt (verified owner) –
Another great quality product from Area 419!
Ronald Blatt (verified owner) –
Excellent products
Larry Hamblin (verified owner) –
Love them!
JEFFREY L STOCK (verified owner) –
The die locking rings are “Massive”, they will hold your dies secure with ‘ZERO Movement”, there is no forgiveness getting the supplied wrench into the inside of these die locking rings, they are also held to the very tight tolerances, just like the press itself.
Anonymous (verified owner) –
Should have option without wrench
John G. (verified owner) –
Works as advertised
Craig (verified owner) –
Great
Dave H. (verified owner) –
These work great, that’s always been the downfall of turret presses, not being able to loose n a die when you have the turret full, this solved the problem.
Jacob J. (verified owner) –
It is one of those items that you must buy when you own a Zero Press. It makes locking down your dies a breeze and they look good to boot.
Muhammed S. (verified owner) –
Very good
Joshua Garcia (verified owner) –
Making the rings wider was a very thought out solution. Great idea. Very easy to install.
Charles Blount (verified owner) –
Great product
Anonymous (verified owner) –
A419 rocks – has made setup of dies quick, easy, and deadly accurate.
Michael May (verified owner) –
No more pliers! These are the best die rings on the market. Tighten them down and the die stays where you put it. The wrench makes for simple easy adjustments. Well done Area 419!
Patrick Martin (verified owner) –
Easy to use in a very well thought out system. Makes my tasks easy without doing the reloading for me. Great quality from a great company.
Gus (verified owner) –
These are better than I expected, and I had very high expectations.
PAUL PEREZ (verified owner) –
The rings are awesome. I was tired of other rings coming loose. These stay PUT!
Tim K. (verified owner) –
Great
Steven Kindel, PA-C (verified owner) –
I have many of these. I have them engraved with the die Information and shell holder number. That way the information is readily available.
Matt Tulk (verified owner) –
This is my forth set of die rings. They are extremely solid and lock up very well. I have them on all four of my zero press turrets.
kevin l. (verified owner) –
👍🏻
Bruce McGaughey (verified owner) –
Great product. Snug them and your ready to go. Do not overtighten them!
Jeremiah Thompson (verified owner) –
Great products, incredible quality but pricey.
Carsten S. (verified owner) –
Work as advertised
Steve H. (verified owner) –
ingenious, solid and smooth
Wayne Mullen (verified owner) –
Like everything else Top Notch
Classious Smith (verified owner) –
Awesome quality equipment- the press is one bad a$$ unit .
Donald L. (verified owner) –
Finally! Someone comes up with a way to loosen and tighten the lock rings on a full turret.
Anders Evason (verified owner) –
Very nice. Complements the Zero press and holds the dies more precise.
Larry Spencer (verified owner) –
Works fantastic
Tom C. (verified owner) –
These are a must!
Anonymous (verified owner) –
Fair value
Jeremy Smith (verified owner) –
These help line everything up concentrically.
C Thomas Myers (verified owner) –
great product, prompt shipping.
Richard D. (verified owner) –
I was skeptical re the value of the rings but I was wrong. They do make a difference.
albert m. (verified owner) –
These are a must, in my opinion, to keep the turret head from being damaged.
Jeremy H. (verified owner) –
Excellent craftsmanship!
Steven G. (verified owner) –
quality
Tim (verified owner) –
Great addition to the Zero. Would be nice to have a way to lock them in place with the die, but I understand the logic for not doing so.
Greg (verified owner) –
Easy to use
No more lock rings that are a pain to adjust
Dennis R. (verified owner) –
Great rings, so far above the rest! Can’t put into words the quality fit, appearance and function. These make other rings just boat anchors! Keep up the great work 419! Love all your products and great service!!!!!
Michael Melland (verified owner) –
These are really nice and do in fact hold the dies straighter. I have the same issue a couple other reviewers have noted in that the wrench slips inside the ring when tightening the dies. Perhaps that;’s by design when a certain torque is reached.
kythe stillwell (verified owner) –
Soiled way to lock down those die.
Joseph Loehle (verified owner) –
Perfect complement for the Zero Press.
William South (verified owner) –
Great Works good
Scott Rainwater (verified owner) –
These rings are just awesome..perfect match and a must have for the ZERO press
Robert Jensen (verified owner) –
Worth every penny locks your dies down better than any other lock ring on the market
Douglas J (verified owner) –
The absolute BEST die rings you could ever own!
Edward (verified owner) –
Yes – you don’t need these to use the Zero Press, BUT you spent $$$ on the machine so why not ensure perfection. The rings are very well made and help maximize the performance of the press.
keith b. (verified owner) –
Swapping out ALL of my other stands to these only as so superior and easy to use
Josh V. (verified owner) –
These are awesome and work great. Much better than a lock ring.
Richard (verified owner) –
A lot nicer than having to worry or remove a previously set die in order to access the lock ring of another…
Mike (verified owner) –
They look great and looking forward to using them
Brian (verified owner) –
Easy to use and they lock really well
Kris F. (verified owner) –
The die rings work very well on the zero press. I wrench makes they easy to tighten/loosen and once tight the dies are aligned accurately and never move. Another quality product from Area 419! Thanks!
Anonymous (verified owner) –
Excellent quality
James S. (verified owner) –
Only problem is that they are out of stock most of the time.
Doug C. (verified owner) –
As usual. Outstanding solid product. These rings are heavy and precision made. The wrench works great. Only confusion was the pic on the website. I envisioned two piece rings. It is just one solid ring, one side w the wrench gears and one flat.
Jay Harrison (verified owner) –
ABSOLUTE PERFECTION!!!! BEST IN THE BUSINESS!!!!
James N. (verified owner) –
great products and service
Vincent (verified owner) –
Like no other die ring on the planet. Even the die-ring is brought to a new level.
Anonymous (verified owner) –
Nice rings and work perfect with the zero. Wish the lock up on the wrench and rings was more positive.
Patrick F. (verified owner) –
Great addition for holding dies in the proper position in the press. Great choice for accurate reloading.
Jordi Calvet Torrents (verified owner) –
Valid!
steve g. (verified owner) –
Great but the threads have to be cleaned before they could be used
Brian S. (verified owner) –
Highest Quality
Anonymous (verified owner) –
Outstanding product that enhances the zero press and dies; cannot imagine not incorporating this superior improvement.
Jim Laverty (verified owner) –
They work beyond my expectations. Simple to use ans space saving, quality built.
Christopher Tuter (verified owner) –
Awesome Rings. One minor complaint is the wrench is not rigid enough and easily slips in the rings and starts to round its teeth off. I feel like you should be able to snug the rings down a little bit more than you can with this wrench. The rings don’t get damaged but my wrench has teeth that look like they are rounding off and that’s just after setting up a few rings.
Christopher Franks (verified owner) –
I waited months for these to come back! Glad I got some!
Anthony A. (verified owner) –
Machining and coating are perfect. The wrench makes it very easy to lock down dies.
Hamid Z. (verified owner) –
I ordered a 9 pack. Are they essential, I have to say no but they are nice to have.
Roger (verified owner) –
Excellent product, provides a larger area for holding the dies in proper alignment and the wrench also allows a superior grip when tightening the ring down.
Mark (verified owner) –
A bit pricey but nice
Ronald v. (verified owner) –
As you would expect for these guys these die rings are flawless. Once you install them you will see what I mean. They just look and feel precise, and they are.
Brandon (verified owner) –
I got a set of these in anticipation of my Zero Press shipping soon. Today I decided to try them out on my existing T-7 press. Wow! These things are solid and do a better job of securing dies in the press. Yet another innovative product!
Gregory DeGenaro (verified owner) –
The best press and best die locking rings available.
MARK SOWELL (verified owner) –
Great product. works better than any other locking ring.
Anonymous (verified owner) –
Great surface area contact. The wrench will attempt to “come out of “ the inside serrations if ANY upward force is applied during the tightening process. Be gentle.
Taken as a whole, the zero press is an extremely well built reloader that marks a significant leap forward in terms of precision.
ROBERT Merulli (verified owner) –
They fit very well and make it easier to install or remove. I just wish I had more turrets to use them on.
Kurt Lohrmann (verified owner) –
Great Product
Thomas Markham (verified owner) –
Awesome stuff!
Larry Joe Montano (verified owner) –
Bad ass hands down better than anything else on the market
Kevin C. (verified owner) –
OMG, these are such an improvement to the standard design. Purchased a 4 pack to test them out. Now I’m just waiting for them to return in stock so my turret head can be complete. Great work guys!!!