3 Inch Stackable Drop Tube

$15.00

3 Inch Drop Tube for Improved Powder Funnel

Description

Powder drop tubes are used when trying to fill cases beyond what is normally achievable with extruded powders.  The longer drop combined with relatively small internal bore allows the kernels of powder to fill the case more fully.

Weight .2 lbs
Dimensions 3 × .8 × .8 in
Manufacturer

Area 419

149 reviews for 3 Inch Stackable Drop Tube

  1. Charles (verified owner) –

    does what it says

  2. Blaine (verified owner) –

    Nice great quality and the anti-stick coating is great.

  3. DANIEL MORRIS (verified owner) –

    Awesome

  4. Spencer L. (verified owner) –

    Precision option to customize your process

  5. Verified Buyer (verified owner) –

    What’s needed when using max charges

  6. Daniel B. (verified owner) –

    Quality.

  7. Michael Langlois (verified owner) –

    Superior machining.

  8. Anonymous (verified owner) –

    Adds too much weight to the funnel

  9. Bradley Duley (verified owner) –

    TOP NOTCH QUALITY

  10. Thomas Haynes (verified owner) –

    Extension is a good length and attaches securely.

  11. Bob (verified owner) –

    Perfect addition

  12. Jan Cremers (verified owner) –

    not really necessary! Works great without drop tube

  13. Ryan G. (verified owner) –

    more A419 precision – not much to say but fits well, works great – machined to perfection

  14. Daniel S. (verified owner) –

    Great product and great service !

  15. John C. (verified owner) –

    Same comments as above.

  16. Ken Snell (verified owner) –

    Works as advertised. Well built. You

  17. Christopher A. (verified owner) –

    Great quality and precision piece!

  18. Kirk Goddard (verified owner) –

    Very nicely made

  19. John C. (verified owner) –

    Nicely made

  20. Steven H. (verified owner) –

    Mates up with funnel and cartridge adapters perfectly!

  21. Dale K. (verified owner) –

    The tubes fit perfectly in the funnel set

  22. Don M. (verified owner) –

    Awesome

  23. Daniel Malcolm (verified owner) –

    The perfect addition to the funnel kit.

  24. Mike Horton (verified owner) –

    Worked great with the funnel kit dropping h4350 in new lapua srp 6.5cm brass

  25. JD Martin (verified owner) –

    Worth the money when doing small or large batches.

  26. Christopher S. (verified owner) –

    The extension tube really helps with compressed powder charges.

  27. DILLON R. (verified owner) –

    Great fit and finish. Works as expected. I used it to load ball powders so far. Will be loading stick powders later.

  28. Scott Allen (verified owner) –

    This along w the funnel is world class…like all Area 419 goodies
    Powder flows like Niagra Falls thru this thing, buy it, you’ll love it

  29. Brian (verified owner) –

    nice

  30. Matt (verified owner) –

    .

  31. PAUL PEREZ (verified owner) –

    Used it on 6.5PRC heavy load with H1000 and Berger 156’s. Works as advertised!

  32. Danny Borg (verified owner) –

    👌

  33. Michael drescher (verified owner) –

    This product is TITS!

  34. Bryan (verified owner) –

    Awesome product!

  35. kevin l. (verified owner) –

    👍🏻

  36. Chris Berry (verified owner) –

    Great addition

  37. Bryan (verified owner) –

    Top quality needed and this is it

  38. Terry V. (verified owner) –

    Just what I orders

  39. Bruce McGaughey (verified owner) –

    Great product

  40. Matthew (verified owner) –

    Like all their other products. Top notch!

  41. Daniel D. (verified owner) –

    Great to have. Excellent addition.

  42. Gary Ruisinger (verified owner) –

    Wanted the drop tube to aid with an especially full case load. Works perfect.

  43. Richard (verified owner) –

    Powder flow’s right through

  44. Stewart M. (verified owner) –

    Works great!

  45. Rory O’Neill (verified owner) –

    Solid and well crafted! Fits beautifully.

  46. Charles Seigmund (verified owner) –

    I’m glad someone is making high quality drop tubes integrated with a powder funnel

  47. Duane B. (verified owner) –

    Excellent craftsmanship

  48. Sam Prater (verified owner) –

    Works great

  49. James Smith (verified owner) –

    Absolutely quality product! Excellent job 419!

  50. Matthew G. (verified owner) –

    Perfect addition to the funnel

  51. John Frogge (verified owner) –

    See comments on Master Funnel Kit.

  52. Richard Herrera (verified owner) –

    Highly functional!!!

  53. Craig (verified owner) –

    Great price

  54. Kenneth Bailey (verified owner) –

    Great addition to the funnel kit to get that power deep into the the case with certain loads.

  55. victor coulter (verified owner) –

    Nice addition to funnel set

  56. Edward (verified owner) –

    Does exactly what it’s designed to do. Another quality product by Area 419.

  57. John G. (verified owner) –

    Well made

  58. Anthony A. (verified owner) –

    Fits the rest of the funnel kit perfectly helps with compacted powder charges

  59. Jeff C. (verified owner) –

    Bought 4!

  60. Cole K. (verified owner) –

    Excellent addition to the area 419 master funnel kit.

  61. Nick (verified owner) –

    Amazing drop! Quality is top notch as always.

  62. Kent H. (verified owner) –

    Awesome product

  63. Rodney (verified owner) –

    This will complement the case adaptors and funel perfectly. Another well thought out and deigned product by Area 419.

  64. Anonymous (verified owner) –

    Great powder stuffer

  65. Jackson G. (verified owner) –

    Don’t know that I’ll need this with every cartridge I load but it’s nice to have when I need it!

  66. Jacob (verified owner) –

    Never knew how helpful a drop tube would be.

  67. Edward (verified owner) –

    Extremely well made and performs great. I am giving it a “3” so that it catches Area 419’s attention. There needs to be a window machined out with plexiglass insert so you can easily see the powder level inside… yes, I would pay more for this feature.

  68. Craig (verified owner) –

    It’s a drop tube. Well made but nothing spectacular.

  69. Harry Cross (verified owner) –

    Great dropper

  70. Rob K. (verified owner) –

    Love this add on

  71. David B. (verified owner) –

    Very high quality. Exceeded my expectations.

  72. Chris (verified owner) –

    It’s works and seems to be well made.

  73. Wade A. (verified owner) –

    Great product to get a little more powder in the case.

  74. Maurizio F. (verified owner) –

    Works.

  75. Robin Retzloff (verified owner) –

    A fine piece of machining.

  76. Micah K. (verified owner) –

    Steller products. Paired perfectly with my Area 419 funnel kit.

  77. Stephen N. (verified owner) –

    Very well made haven’t used yet

  78. Steve B. (verified owner) –

    Handy when you need a taller funnel

  79. David G. (verified owner) –

    As advertised

  80. Kyle (verified owner) –

    A really nice add to the funnel kit. I purchased 2 for multiple height options.

  81. Seth Dyer (verified owner) –

    Awesome

  82. mark burgess (verified owner) –

    Great part. A must have

  83. Ted A. (verified owner) –

    Works good, like it also!

  84. Charles Napikoski (verified owner) –

    Everything is clean well made and has a great finish.

  85. Darren I. (verified owner) –

    I have two of these that I stack an it works awesome it lowers the powder in the cases

  86. Anonymous (verified owner) –

    Great

  87. Brandon Lehner (verified owner) –

    It does it’s job!

  88. DANIEL G. (verified owner) –

    I purchased this drop tube at the same time I purchased the Funnel Kit. This drop tube is made to work with the funnel kit. It is very well made and works like a charm. If you need a drop tube on your funnel then just get this one.

  89. Kenneth E. (verified owner) –

    Exceptional products…Fast shipping…5 Stars

  90. Antione Laplante (verified owner) –

    Nice

  91. Brian Smith (verified owner) –

    Great Stuff

  92. Bob M. (verified owner) –

    Great addition to my home reloading bench

  93. steve g. (verified owner) –

    Great

  94. Robert (verified owner) –

    Works like a drop tube

  95. John Hipskind (verified owner) –

    Very high quality piece if a little extra reach is necessary for the master funnel kit. I can’t recommend this company enough!

  96. Anonymous (verified owner) –

    Great product. Must have with funnel kit.

  97. Levi (verified owner) –

    Does what it’s supposed to do.

  98. Benny (verified owner) –

    Great quality.

  99. Richard Cochran (verified owner) –

    As advertised

  100. hunter kolb (verified owner) –

    Nice!

  101. John (verified owner) –

    Excellent

  102. Kenneth Longo (verified owner) –

    Fantastic across the board.

  103. Milton Turner (verified owner) –

    I wish the tubes could be turned down thinner. Also a clear polymer tube would be perfect. I’ve had powder bridging with N570 a few times.

  104. William (verified owner) –

    I gave this 5 stars because it is very well made but I have not used it yet. Bought it just in case it was needed and it completed the kit.

  105. Donald (verified owner) –

    It’s tall enough to clear my Whidden seating die on a 550 tool head.

  106. Andrew Moxom (verified owner) –

    Not used it yet, but it looks like it will work very well with extruded powder to get a good charge into the case without bunching up in the process

  107. Paul D. (verified owner) –

    A good addition for the master funnel kit

  108. Arthur Morgan (verified owner) –

    Gorgeous, haven’t tried it yet.

  109. Mike Q. (verified owner) –

    A++

  110. Stuart T. (verified owner) –

    Awesome

  111. Anonymous (verified owner) –

    Exactly what I was looking for.

  112. Derek (verified owner) –

    Wanting this for 223 long dropping h4895. The inner diameter is the same size as the 22 cal shell bushing. So the powder still just flys right thru. I Bet it’ll work better on bigger cartridges with long extruded powder

  113. Steve M. (verified owner) –

    Fantastic, too bad these aren’t made of clear plastic although that may introduce a static problem.

  114. Antione L. (verified owner) –

    Gives me options on larger calipers

  115. Gregory D. (verified owner) –

    Great drop tube.

  116. Roy Smit (verified owner) –

    well made!.

  117. Tom H. (verified owner) –

    Works perfect

  118. Patrick M. (verified owner) –

    There are certain things you see in passing that make you think “no way that actually works”. I’ll admit this was one of those things for me, but I will also admit I was very wrong. If you use larger extruded powders and are tired of crispy crunchy noises and want to actually send loads so hot that it makes you question your existence every single trigger pull without over filling the case. Get one of these tubes for your funnel and get to sending. It works.

  119. Royston W. (verified owner) –

    Supplements the rest of the 🔧

    Image #1 from Royston W.

  120. Richard B. (verified owner) –

    Fits and works great!

  121. Matthew C. (verified owner) –

    Worked awesome bullet doesn’t crush powder anymore

  122. Thomas M. (verified owner) –

    Works like it’s supposed to. A nice handle for your funnels.

  123. CARLO LODICO (verified owner) –

    I thought this was a bit high until I received it and seen how well it works

    Image #1 from CARLO LODICO

  124. Oleg S. (verified owner) –

    Excellent quality and size and color perfectly match my old extension tube.

    Image #1 from Oleg S.

  125. Matthew Johnson (verified owner) –

    Really nice drop tube that’s a perfect match with the Area419 funnel!

  126. Roger Veth (verified owner) –

    Again, this product works perfectly as designed. It’s such a simple idea, but is engineered to perfection. Other drop tubes I’ve used are usually not so easy to attach to the funnel or the head. The threads on this one are machined perfectly and work with the other parts with ease.

  127. Peter G. (verified owner) –

    If your buying one of these you already know the quality of the area 419 line up

  128. Fred Van Der Linde (verified owner) –

    High quality and worksmanship.

  129. Carl W. (verified owner) –

    good upgrade for larger calibers

  130. Sean C. (verified owner) –

    High quality, great fit and finish. Just what I was hoping for

  131. Robert Watts (verified owner) –

    Same great quality as everything else.

  132. ROBERT (verified owner) –

    Great product…just what I wanted.

  133. Barry (verified owner) –

    Excellent quality

  134. Steven G. (verified owner) –

    Fit and finish is great. Works excellent.

  135. Sebastian F. (verified owner) –

    This, along with the funnel are great for getting heavier loads evenly distributed – saves time too.

  136. Philip D. (verified owner) –

    Well built and helps with my compressed load.

  137. JOHN B. (verified owner) –

    Following suit with the extremely high quality Area419 is known for

  138. James (verified owner) –

    👍😀

  139. Chris Burns (verified owner) –

    Perfect complement to the powder funnel set.

  140. Peter (verified owner) –

    works just like it should.. and the flutes even index correctly with the funnel head

  141. MARK (verified owner) –

    Great

  142. Jon P. (verified owner) –

    Works great.

  143. Anthony K. (verified owner) –

    Works great and looks just as good, what more can you ask for.

  144. Jonathan (verified owner) –

    gets me more height makes more comfortable to use doing handgun reloading

  145. David S. (verified owner) –

    Fit & Finish are top shelf

  146. Steven C. (verified owner) –

    Worked perfectly

  147. David Levandowsky (verified owner) –

    Quality product

  148. Darryl (verified owner) –

    Fit is excellent, sure helps when dropping compressed charges.

  149. acopenhaver50 (verified owner) –

    Fit and finish is first-rate like all of their products.

Add a review

Your email address will not be published. Required fields are marked *

Related products

+

ZERO M-Series Sizing Dies

$450.00 – $725.00
+

Area 419 ZERO Headspace and Ogive Measurement Gauge Kit

$300.00 – $375.00
+

Universal 7/8″ Die Ring for Turret Presses

$25.00 – $195.00
+
Out of stock

ZERO Bullet Tray

$65.00
+

ZERO Sizing Die Mandrel Kits

$145.00
3 Inch Stackable Drop Tube