Sale!

ZERO Die Ring Multi-Packs

$100.00 – $200.00

Clear

All Multi-Packs include multiple rings (details below) and a die wrench. Finish on all multi-packs will be black nitride. Wrenches are aluminum, so the finish is a black hardcoat anodize.

7/8″ Multi-Pack includes (4) rings, all 7/8×14, and a wrench.
7/8″ Turret-Pack includes (9) rings, all 7/8×14, and a wrench.
1-1/4″ Multi-Pack includes (4) rings, all 1-1/4×12, and a wrench.
Hybrid Multi-Pack includes (2) 7/8×14 rings, (2) 1-1/4×12 rings, and a wrench.

ORDER INDIVIDUAL RINGS >>HERE<<

Through the research and development process for the ZERO, it became a testing bed for MANY reloading products. We needed to isolate variables, and ensure we were testing the press and not just the dies/shellholders/etc. One of the major culprits we found for inconsistency was actually lock rings. MOST lock rings on the market are held into place by a set screw or they’re split/clamp style. We found these to be inconsistent by design, as they needed to secure themselves to the dies for constant removal/replacement in single-stage presses.

NOTE: THESE RINGS CAN NOT BE USED IN EVERY SLOT ON A REDDING T-7, THE RING DIAMETER IS TOO LARGE. 

So, we decided to make our own. Here’s where we landed:

  • LARGE DIAMETER – more surface contact with the turret head means the ring will align with the press and force the die straight, instead of grabbing onto the die and aligning as it may.
  • MORE THREAD ENGAGEMENT – the rings feature .350″ of thread engagement, which is 15-25% more than common die lock rings. This results in roughly a full thread of additional engagement, increasing the ability of the ring to square the die to the press.
  • INTERNAL WRENCH ENGAGEMENT – with traditional rings, there is a flat or knurling on the outside, which requires you to get a wrench around the outside to tighten. On a multi-die head this requires you to get tools between dies and fight with the location – or you have to make the ring smaller which has real downsides. This ring is designed with internal wrench engagement, mitigating this issue altogether.
  • PRECISION STAINLESS STEEL MANUFACTURING – The threads and bottom face of the ring are machined in a single operation, delivering square surfaces to align your die. We then leave the ring and threads hole and unobscured by splits and grub screws. All rings are made of 17-4PH stainless steel. Available in raw stainless or with a black nitride finish.

Total thickness of rings is .500″ and outside diameter is 1.685″

Weight 1 lbs
Dimensions 7 × 4 × 1 in
Multi-Pack Type

7/8" Multi-Pack (4 Rings + Wrench), 7/8" Turret-Pack (9 Rings + Wrench), 1-1/4" Multi-Pack (4 Rings + Wrench), Hybrid Multi-Pack (4 Rings + Wrench)
Manufacturer

Area 419

56 reviews for ZERO Die Ring Multi-Packs

  1. Kevin C. (verified owner) –

    OMG, these are such an improvement to the standard design. Purchased a 4 pack to test them out. Now I’m just waiting for them to return in stock so my turret head can be complete. Great work guys!!!

  2. Larry Joe Montano (verified owner) –

    Bad ass hands down better than anything else on the market

  3. Thomas Markham (verified owner) –

    Awesome stuff!

  4. Kurt Lohrmann (verified owner) –

    Great Product

  5. ROBERT Merulli (verified owner) –

    They fit very well and make it easier to install or remove. I just wish I had more turrets to use them on.

  6. Anonymous (verified owner) –

    Great surface area contact. The wrench will attempt to “come out of “ the inside serrations if ANY upward force is applied during the tightening process. Be gentle.
    Taken as a whole, the zero press is an extremely well built reloader that marks a significant leap forward in terms of precision.

  7. MARK SOWELL (verified owner) –

    Great product. works better than any other locking ring.

  8. Gregory DeGenaro (verified owner) –

    The best press and best die locking rings available.

    Uploaded image(s):

    Image #1 from Gregory DeGenaro
    Image #2 from Gregory DeGenaro
    Image #3 from Gregory DeGenaro

  9. Brandon (verified owner) –

    I got a set of these in anticipation of my Zero Press shipping soon. Today I decided to try them out on my existing T-7 press. Wow! These things are solid and do a better job of securing dies in the press. Yet another innovative product!

  10. Ronald v. (verified owner) –

    As you would expect for these guys these die rings are flawless. Once you install them you will see what I mean. They just look and feel precise, and they are.

  11. Mark (verified owner) –

    A bit pricey but nice

  12. Roger (verified owner) –

    Excellent product, provides a larger area for holding the dies in proper alignment and the wrench also allows a superior grip when tightening the ring down.

  13. Hamid Z. (verified owner) –

    I ordered a 9 pack. Are they essential, I have to say no but they are nice to have.

  14. Anthony A. (verified owner) –

    Machining and coating are perfect. The wrench makes it very easy to lock down dies.

  15. Christopher Franks (verified owner) –

    I waited months for these to come back! Glad I got some!

  16. Christopher Tuter (verified owner) –

    Awesome Rings. One minor complaint is the wrench is not rigid enough and easily slips in the rings and starts to round its teeth off. I feel like you should be able to snug the rings down a little bit more than you can with this wrench. The rings don’t get damaged but my wrench has teeth that look like they are rounding off and that’s just after setting up a few rings.

  17. Jim Laverty (verified owner) –

    They work beyond my expectations. Simple to use ans space saving, quality built.

  18. Anonymous (verified owner) –

    Outstanding product that enhances the zero press and dies; cannot imagine not incorporating this superior improvement.

  19. Brian S. (verified owner) –

    Highest Quality

  20. steve g. (verified owner) –

    Great but the threads have to be cleaned before they could be used

  21. Jordi Calvet Torrents (verified owner) –

    Valid!

  22. Patrick F. (verified owner) –

    Great addition for holding dies in the proper position in the press. Great choice for accurate reloading.

  23. Anonymous (verified owner) –

    Nice rings and work perfect with the zero. Wish the lock up on the wrench and rings was more positive.

  24. Vincent (verified owner) –

    Like no other die ring on the planet. Even the die-ring is brought to a new level.

  25. James N. (verified owner) –

    great products and service

  26. Jay Harrison (verified owner) –

    ABSOLUTE PERFECTION!!!! BEST IN THE BUSINESS!!!!

  27. Doug C. (verified owner) –

    As usual. Outstanding solid product. These rings are heavy and precision made. The wrench works great. Only confusion was the pic on the website. I envisioned two piece rings. It is just one solid ring, one side w the wrench gears and one flat.

  28. James S. (verified owner) –

    Only problem is that they are out of stock most of the time.

  29. Anonymous (verified owner) –

    Excellent quality

  30. Kris F. (verified owner) –

    The die rings work very well on the zero press. I wrench makes they easy to tighten/loosen and once tight the dies are aligned accurately and never move. Another quality product from Area 419! Thanks!

  31. Brian (verified owner) –

    Easy to use and they lock really well

  32. Mike (verified owner) –

    They look great and looking forward to using them

  33. Richard (verified owner) –

    A lot nicer than having to worry or remove a previously set die in order to access the lock ring of another…

  34. Josh V. (verified owner) –

    These are awesome and work great. Much better than a lock ring.

  35. keith b. (verified owner) –

    Swapping out ALL of my other stands to these only as so superior and easy to use

  36. Edward (verified owner) –

    Yes – you don’t need these to use the Zero Press, BUT you spent $$$ on the machine so why not ensure perfection. The rings are very well made and help maximize the performance of the press.

  37. Douglas J (verified owner) –

    The absolute BEST die rings you could ever own!

  38. Robert Jensen (verified owner) –

    Worth every penny locks your dies down better than any other lock ring on the market

  39. Scott Rainwater (verified owner) –

    These rings are just awesome..perfect match and a must have for the ZERO press

  40. William South (verified owner) –

    Great Works good

    Uploaded image(s):

    Image #1 from William South

  41. Joseph Loehle (verified owner) –

    Perfect complement for the Zero Press.

  42. kythe stillwell (verified owner) –

    Soiled way to lock down those die.

  43. Michael Melland (verified owner) –

    These are really nice and do in fact hold the dies straighter. I have the same issue a couple other reviewers have noted in that the wrench slips inside the ring when tightening the dies. Perhaps that;’s by design when a certain torque is reached.

  44. Dennis R. (verified owner) –

    Great rings, so far above the rest! Can’t put into words the quality fit, appearance and function. These make other rings just boat anchors! Keep up the great work 419! Love all your products and great service!!!!!

  45. Greg (verified owner) –

    Easy to use
    No more lock rings that are a pain to adjust

  46. Tim (verified owner) –

    Great addition to the Zero. Would be nice to have a way to lock them in place with the die, but I understand the logic for not doing so.

  47. Steven G. (verified owner) –

    quality

  48. Jeremy H. (verified owner) –

    Excellent craftsmanship!

  49. albert m. (verified owner) –

    These are a must, in my opinion, to keep the turret head from being damaged.

  50. Richard D. (verified owner) –

    I was skeptical re the value of the rings but I was wrong. They do make a difference.

  51. C Thomas Myers (verified owner) –

    great product, prompt shipping.

  52. Jeremy Smith (verified owner) –

    These help line everything up concentrically.

  53. Anonymous (verified owner) –

    Fair value

  54. Tom C. (verified owner) –

    These are a must!

  55. Larry Spencer (verified owner) –

    Works fantastic

  56. Anders Evason (verified owner) –

    Very nice. Complements the Zero press and holds the dies more precise.

Add a review

Related products

Quick View
Out of stock

ZERO Reloading Press Extra Turret *BLEM*

$195.00
Select options
Quick View

ZERO Die Rings

$25.00
Select options
Sale!
Quick View
Out of stock

BLEM Billet Loading Block – Clear Anodized

$40.00
Select options
Quick View

ZERO Bullet Tray

$65.00
Add to cart
Quick View

Mighty Armory PUA Decapping Die w/ Primer Flicker Spring

$59.99
Add to cart