Master Funnel Kit

$100.00

Click HERE to purchase drop tubes

Out of stock

Notify me when item is back in stock

This product listing is for the Master Funnel Kit, including the following:

The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.  

Universal plastic powder funnels have several issues that are solved with this system:

1.  Static cling.  Plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2.  No such thing as universal.  There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont fit.
3.  Universal means that it has a hole meant for 22 caliber.  So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck-diameter specific for each caliber.  They do not rely on fitting over the body of the case to hold in place.  They are sized slightly larger than the neck diameter so that they hold solid on the case.  Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.  This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls.  This also makes it far safer for use with black powder.

  • “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck.  It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
  • 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
  • Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
  • NEW!  Machined in handles to give you a grip if you like to grab the funnel from the side instead of top.  Symmetrical design means the funnel no longer tips to the side.
  • MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!

Billet Storage Block

  • Machined in house from a solid billet of 6061-T6 aluminum, every single surface of the block is machined.
  • Holds the funnel with or without a head attached as well as 10 spots for heads or drop tubes to be stored
  • Front six head storage locations are engraved for standard calibers.
  • Rubber feet on the bottom keep from sliding around on your bench
Weight 1 lbs
Dimensions 7 × 4 × 4 in
Manufacturer

Area 419

72 reviews for Master Funnel Kit

  1. Jason (verified owner) –

    The machine work is 1st rate as expected but even the packaging is nice. I paid almost $30 for a single sized caliber funnel of another brand. When you consider what you’re getting here its a great deal. No more clogged static filled plastic funnels for me.

  2. Stephen (verified owner) –

    I received my funnel set and wanted to say how pleased I am with the quality and performance. I’ve used Satern funnels up to this point but yours are far superior. Powder fills the case evenly, doesn’t stick to the funnel and as a bonus the funnel makes a pleasing ringing sound as the powder spirals into the case. The different adaptors fit the cases perfectly and are heavy enough so you don’t have to worry about it tipping.

    Thanks for the great product!

  3. forrestthehunter (verified owner) –

    I just got my funnel kit today. Very very happy. I’ve already ready loaded 100 rounds of 22-250. the funnel fits my brass nicely and the power flows great. this funnel will be a great addition to your reloading bench.

  4. Dave Nimetz –

    One of the best upgrades i have made for my reloading bench. Very well machined and different heads fit perfectly.

    All the upgrade parts at Area 419 are top notch. Anything on the site is 5 stars

  5. Paul Hittle –

    I was really hesitate to spend so much for a funnel, but it’s the best money I’ve ever spent. No more static cling or having the powder clog up. I highly recommend it.

  6. Nick (verified owner) –

    Great quality funnel kit. Ordered four drop tubes at time purchase and overall quality is great. Best part of area 419 products are your buying for life. Quality/Material/Service all top notch.

  7. Travis Hamilton –

    The master funnel kit is top notch. No more tapping h4350 in to a 6mm or 6.5mm case. It really speeds things up and no frustration. I’m using it from 223 to 300wm and very soon I’ll be using it to reload 357max. Area419 puts out some great quality and innovative products. Now I need the powder cup.

  8. Todd Orr –

    This is best Funnel System I have ever Used.!! Area 419 Best products

  9. Chad Hurliman (verified owner) –

    Funnel kit is awesome, works very good, fit is spot on, powder runs smoothly with no sticking. Definately worth it!

  10. Levi Humes (verified owner) –

    I got my funnel kit a while back and it has been great! They’re so easy to use and absolutely no powder sticks to the funnel. Definitely worth the money. I would definitely recommend to any reloader.

  11. Jason –

    The attention to detail is incredible. Be forwarned that it is addictive and you will want one of every product the make. Great products guys!

  12. Kurt –

    I always used the crappy plastic funnels you buy for a couple bucks. I recently saw these and, since I was upgrading my equipment, I ordered a set. Holy smoke, what a difference! No powder bridging AT ALL! The quality is amazing and it just looks badass.

  13. Phil Pickens (verified owner) –

    The funnel kit is one of my favorite pieces of gear on my reloading bench. This simple items speeds up the pace and keeps things flowing smooth. No more tapping, shaking, and checking to see if the powder made its way into a case! If you need a long tube just screw it on! Going from 6.5 to 223 to 338… just change the tip! Thanks for putting these together guys! Always innovating! Always looking forward!

  14. Steven McVey (verified owner) –

    These really have no description. They just plain work. They are quick, no static, no powder sticking to the sides, no need to tap to get the powder to drop…just a great quality product an awesome company to work with..

  15. Ryan Johnson –

    I purchased one of the first funnel kits. I have used it a lot. It is by far the best funnel out there. With other funnels you need to use a drop tube to get the powder compressed. I have not had to use one to get the results I am after. Heads have all fit great so far. Fit and finish is great.

  16. Jordan mullen –

    Best funnel I’ve ever used. I have cheap plastic green funnels and static and not always flowing was an issue. Bought a hardcore gear aluminum funnel, nice but small and caliber specific. This funnel works great on all my calibers and being able to adapt it to my standard Dillon powder die and not needing a different die like with the Dillon funnel attachment is awesome. It’s big, no issues with blockage, look amazing and fits great.

  17. James ahn –

    I’ve had my master funnel kit since inception via snipershide threads.

    This is a very good piece of kit. Is it worth it to all reloaders? Not up front but let me
    Explain…

    -stackable drop tubes. This helps immensely when throwing powder and you need good compression, especially
    For magnums. You can achieve this by throwing powder on a short little funnel and shaking it around to let it settle. Saves time and possible spillage here.

    -machines aluminum with threading. Nicely made and not smooth ended which can cause uneven fitment for “universal style” type funnels.

    -caliber specific inserts: reason why Saturn funnels did very well was due to aluminum construction, smooth powder flow (no static clinging) and caliber specific threads.
    Problems were adding drop tubes required modification and you need to buy multiple funnels to make calibers work. Area 419 solved this albeit at a reflected price.
    Do you need all the inserts? No; but they’re handy to have in case.

    Bottom line: smooth , unobstructed and clean flow of powder into your case.

  18. Casey McDonald –

    I’ve had this funnel kit for 8+ months now. Its the only funnel kit I will ever need and is well worth the money. Thank you Area 419 for a quality product.

  19. Brian Squires –

    I have used this funnel since they first became availble. The quality and workmanship is second to none. If you are thinking about purchasing this funnel you wont be dissapointded.

  20. Gary Conner (verified owner) –

    An elegant piece that performs as well as it looks. Every kernel of powder in the case everytime. It simply delivers the powder with precision as designed.

  21. Milen Tzolov (verified owner) –

    Excellent kit and great service !!!
    Thanks

  22. Shane Bryan (verified owner) –

    Very high quality like all Area 419 products. Replaced all of my funnels with the one simple kit. Powder flows perfectly and you don’t have to worry about clogging it up.

  23. Andy Ferguson (verified owner) –

    Best funnel available, hands down. Great machining, never clogs, never tips, no static.

  24. eaayoung –

    Received my funnel and tips today. The quality is unsurpassed. Powder just slides down the funnel.

  25. Joseph Humphrey (verified owner) –

    I’ve had this kit for a couple of months, and it was a much needed upgrade from the plastic funnels that I had been using. I use this kit for 4 different calibers, and the interchangeable, caliber specific, heads seal around the case mouths perfectly. The powder flows smoothly without sticking (no static cling) to any of the funnel parts. The caliber heads screw on easily and securely, and with the storage base I know exactly where the required head is.
    For compressed or full case charges, I would recommend getting the drop tube to help compact the powder into the cases better. Buy this Funnel Kit and you will not be disappointed.
    I cannot recommend this kit, or any of the Area 419 products, any higher. The RCBS Chargemaster 1500 metal pan and cup are unbelievable, and the Hellfire Breaks are the best I’ve ever tried, and I now have 3.

  26. gruising –

    Sure wasn’t made in Asia to be as cheap as possible. Boy, am I glad. Stick powder has been a problem with every funnel I have tried, not this one. If a funnel can be called precision, this one is for sure. Thought about those ‘caliber specific’ funnels but could not justify cost for nine or ten. Base is a piece of art. A+++

  27. Hawks_Feather (verified owner) –

    I have always appreciated fine workmanship and this is an excellent example of just that. The set arrived today and the fit and finish is flawless and it will last forever – unlike plastic funnels that have cracked. I tested several cases with the different heads and the fit is just like the rest of the unit – excellent. This is not an inexpensive shooting accessory, but one that is well worth the money. The only thing that could make it better would be the ability to select the heads that would come with the set. This is a great investment and an item that I am sure will be here long after I am gone.

  28. Tom G (verified owner) –

    Recently received this kit. High quality all the way! This is a very nice heavy duty machined set that’ll last forever. It might be a little costly but consider its machined from solid aluminum. American made from American materials. $100 really ain’t that bad. Get it!

  29. DANIEL JENKINS (verified owner) –

    Unreal quality, I mean, just unreal.

    Even the packaging is fantastic. The pics don’t do this kit justice to be honest. I am so glad I decided to spoil myself with this one as I got tired of janky plastic funnels snagging on brass and apilling my carefully weighed powder charge, or leaking around the edge, or bridging etc. Even Johnny’s Reloading Bench has tried various other metal funnel solutions but never really liked any of them. It would REALLY be worth it to send a kit to JRB for him to review, I bet you will sell a few for sure.

    I tripped across this funnel set in a random youtube video, and I paused the video… WTF is that!?
    Next thing you know, here I am putting in a order for one. I went ahead and swooped up 2 drop tubes and the pistol fitting as well.
    Loaded 25 rounds of 223 and everything worked great, totally worth it!!
    Perhaps I didn’t catch it on the webpage or description, but each caliber fitting is color coded of course, but additionally, the caliber is engraved into the base plate, very nice touch!!

  30. Jorge Bonilla (verified owner) –

    The master funnel kit is one of my favorite. It eliminates the need for multiple funnels, that take up a lot of space on your reloading bench. I can use the same funnel for various calibers by just changing out the adapter.

  31. Francis Colon (verified owner) –

    Easy to use, PERFECT fit on all brass and helps eliminate bridging. Must have compared to the cheap plastic stuff. Should have bought it years ago!

  32. Brandon –

    Best funnel, and kit I think money can buy! I can go from 22 grain charges for my .223 to 108 gr charges for my ultra mag and no static and no need to tap the funnel. Everything fits tight and right! Highly recommend!!

  33. Brandon Haywood (verified owner) –

    If you reload for multiple calibers and don’t own one of these kits yet, you’re wrong. Easy to use, powder flows like water, no stuck kernels, and very well made.

  34. Rogelio Landgrave –

    Entry level plastic powder funnel provided by press manufacturer had me reeling, powder stuck to it even if I wiped it down with an anti-static cloth… I ordered the powder funnel kit….. life reloading with a quality piece, I’ll never look back!

  35. Dan Chattin –

    Great addition to any reloading bench!
    Awesome concept that eliminates the need for multiple funnels. The aesthetics and quality you expect and always receive from Area 419.

  36. Jonathan Souther –

    The master funnel kit is awesome. I own several Area419 products and they are great quality and work flawlessly.

  37. Jayson K (verified owner) –

    Awesome quality. Way better than the plastic ones.

  38. Darryl (verified owner) –

    What a great product. Eliminated my need for a drawer full of funnels. Modularity at its finest.

  39. James –

    Awesome little funnel kit. Great quality and appearance. Does as advertised, no messes on work bench either.

  40. Anthony Kuchynka –

    The best funnel I’ve ever used. No more static cling, and no more holding the funnel for every round.

  41. Steve –

    By far the best funnel kit for rifle reloading. No more cheap plastic to hold static. Very well thought out kit and very high quality.

  42. Rs (verified owner) –

    This funnel is worth its weight in gold. I never thought I would be comfortable spending this much money on a funnel. But after doing it and using it. I can’t believe I didn’t do it sooner. Powder drops so fast. No cling and it’s a large funnel making it easier to poor without fear of spilling in the first place

  43. Ryan –

    I bought this about a month ago and have loaded about 600 rounds with it. I was sceptical at first as the price is steep but it’s totally worth it. Not one kernel has spilled out. And the fit over different calibers is perfect.

  44. ez.deasmuth –

    Best funnel I have used, quick and efficient! Seems like the powder gets sucked into the case.

  45. David Levandowsky (verified owner) –

    Quality product

  46. woodrow hailey (verified owner) –

    first class equipment and i am very satisfied with this product and will be ordering more items in the future

  47. Walter R. (verified owner) –

    Nice machined. Worth every $.

    Uploaded image(s):

    Image #1 from Walter R.

  48. Philip Pratt (verified owner) –

    Top marks for these guys, they make them so Good

  49. Derrick Crabtree (verified owner) –

    Works great!

  50. Kevin P. (verified owner) –

    Good Quality

  51. John B. (verified owner) –

    The funnels are flawless. Packing was by far the best I’ve received on anything in that price range.

  52. David S. (verified owner) –

    Does exactly what you’d expect & looks great

  53. Anonymous (verified owner) –

    Funnel kit quality is top notch!!

  54. David Whitson (verified owner) –

    Perfect funnel system – really nice machining – great for multiple calibers

  55. Joe M. (verified owner) –

    You don’t know what you are missing until you get this funnel. Powder sticking to the side of the funnel is a thing of the past.

  56. Duane S. (verified owner) –

    The necks fit tight in the funnel

  57. Ryan K. (verified owner) –

    Beautiful set, definitely worth the money.

  58. Jonathan (verified owner) –

    Well made the aluminum tray stay put on reloading table do not slides around helps keep organize has most popular attachment different rifle calibers u can buy more Nussle for handgun cases

  59. Robert Penick (verified owner) –

    Needs a handle included when you by the kit.

    • Craig Arnzen (store manager) –

      Hey Robert, we changed the design a while back, as we used to sell them with a handle. What we found with handles is they throw off the balance of the funnel and guys were having issues with tipping or the heads binding on the neck of the cases. Funnels now have two tabs, one on each side, to be used to grab. They’re balanced, and give you something nice to get ahold of!

  60. Jonathan R. (verified owner) –

    It works awesome!

  61. Mike Keenan (verified owner) –

    Exceptional design and machine work. Anything less would be a disappointment from this company.

  62. Kyle Marsh (verified owner) –

    I got these to minimize powder issues. Occasionally powder will jamb up and hold in the neck of the funnel vs going in – in my old system. I have experienced that once with this one so far. Plus the tolerance of mouth and case holder separation, allows me to grab shell and funnel and dump excess powder into my hopper when I screw up. That is a plus.

  63. Brendon R. (verified owner) –

    Well made, quality components with a tight fit. I didn’t think I needed one and my one size fits all plastic funnel was fine until this kit showed me how wrong I was. Get one.

  64. James S. (verified owner) –

    I got tired using the old plastic funnels that loved to attract static electricity and wanted to clog powder at the hole. With the grooves and aluminum construction, the powder goes in and goes in fast. The caliber specific neck adapters are a joy and quick to change and the base is a solid quality piece. If I had any thing I would change, I would like the funnel to be a bit bigger.

  65. Jon P. (verified owner) –

    Substantially better than the funnels I have used for many year. Fit is perfect with no alignment issues causing any powder loss at brass/funnel junction.

  66. James McDonald (verified owner) –

    Great company! Great products!

  67. Philip D. (verified owner) –

    Honestly wish I bought it years ago. After fighting the old funnel falling off the 6GT and blocking up for the 300NM, I bought this and it is truly worth it. 10/10 recommend for anyone running multiple calibers and just want a little bit if convince.

  68. Cody C. (verified owner) –

    Such a well thought out a s useful product!!!

  69. Steven G. (verified owner) –

    Fit and finish is great. Works excellent. As usual Area 419 exceeded expectations.

  70. Gary R. (verified owner) –

    Superb quality

  71. Barry (verified owner) –

    Excellent quality and even the packaging is beyond reproach. Very happy with every aspect of Area 419

  72. mark baker (verified owner) –

    great product

Add a review

Related products

Sale!
Quick View
Out of stock

Area 419 Complete ACCESSORY KIT for Sartorius Scales

$585.00 $550.00
Read more
Quick View

Powder Cup – For Autotrickler and Similar Lab Balances

$70.00
Add to cart
Sale!
Quick View

Area 419 Complete V3 ACCESSORY KIT for A&D FX Scales

$425.00 $390.00
Add to cart
Quick View

Improved Billet Adjustable BASE for Auto-Trickler V2/V3

$75.00
Add to cart
Quick View

Billet Loading Block – Clear Anodized

$55.00
Select options
Quick View
Out of stock

ZERO Die Rings

$25.00
Select options
Quick View

Cleaning Rod Storage Rack

$75.00
Select options
Quick View

Area 419 – LID for A&D FXi Scales

$65.00
Add to cart
Quick View

ZERO Reloading Press Extra Turret

$195.00
Select options
Quick View
Out of stock

Pyrex Hopper with Shutoff Valve for Lee Perfect Powder Measure (Autothrow)

$100.00
Read more
Sale!
Quick View

ZERO Die Ring Multi-Packs

$100.00 – $200.00
Select options
Quick View

Interchangeable Funnel Heads

$8.00 – $15.00
Select options