ARCALOCK Clamp
$85.00
THIS CLAMP WORKS ON ALL STANDARD ARCA/1.5″ DOVETAIL RAILS
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.
Introducing the ARCALOCK Dovetail Rail System
Clamp Features:
– Proprietary two-stage screw design.
- Clamping screw features two different thread pitches. The coarse 16tpi is used when no tension is on clamp, allowing rapid movement of the clamp vs others on the market. With high speed comes low torque though, so to counteract this as soon as the clamp sees tension it will switch to the 32tpi threads in the knob to give you extra torque when not using on an ARCALOCK rail.
- ~1/4 turn releases the clamp from the detents on the ARCALOCK rail for movement
- One turn fully releases clamp to be removed from rail
– Clamp directly bolts to Atlas Bipods using their factory hardware (excluding the 2-screw bipods. QD and NC only)
– Clamp to Atlas 2-screw bipods with Picatinny/1913 Adapter available HERE
– Barricade stop can either be standalone on the clamp using provided hardware, or sandwiched between an Atlas bipod. *Barricade stop does not directly work with Harris Bipods*
– Barricade Kit must be purchased for barricade stop use with Harris Bipods
– Harris Bipod adapter available immediately, find it HERE
– Clamp is backwards compatible with standard ARCA rails by removing the three pins, and will still work this way to give you infinite sliding adjustment on the ARCALOCK rail
– Moving side of clamp is dovetailed on both sides to prevent tilt
– Knob/Screw design prevents the clamp from being able to fall apart if you loosen it too far
– Clamp and knob machined in house from 6061-T6 Aluminum
– Screw is turned from 303 Stainless Steel
– Type III Hardcoat Black anodized clamp and Gold anodized knob
– Clamp Weight: 72.5 Grams
Rail Features:
– Universal rail design is the same footprint as our previous rail. (There were two revisions to the hole spacing, if you have a very early model your hole spacing may change)
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp, will not damage bags or your hands.
– 65 Locking positions available on the 14″ rail
– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp
– Serrated fixed rear barricade stop is same as before, but now we include an extension plug to raise it by another 1/2″
– Rail is 14″ long giving you the entire length of the stock forend for attachments. The best part is, it still only weighs in at a paltry 5.6oz
– Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.
– While designed with Manners Composite Stocks in mind, this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
– Spacers for rifle stocks with non-flat forends are available HERE
– Designed to attach to the rifle up to 4 places for maximum strength and stability.
– Extends past the end of most rifle stocks, allowing a further forward bipod attachment, increasing stability.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Rail comes with 2 Remington 700-style action screws of different lengths to fit the rail to the front action screw attachment point. Some trimming will likely be required.
– A 3/4″ paddle bit and drill press may be required for installation of tee-nuts, depending on current rifle configuration. Tee nuts and hardware included.
***Includes clamp only, no bipod or other pictured items
| Weight | .5 lbs |
|---|---|
| Dimensions | 6 × 3.5 × 2 in |
| Manufacturer | Area 419 |
275 reviews for ARCALOCK Clamp
Related products
Louis (verified owner) –
Quality Clamp
Philip East (verified owner) –
This clamp is great when using their Universal Arca Rail!!!
Dominic E. (verified owner) –
Works as described. Good solution for a removable pic attachment on an Arca Rail.
Customer Service was helpful with questions.
Delivery was timely.
Kirk L. (verified owner) –
Great clamp, excellent quality and worked well
Sean (verified owner) –
As always, great quality products. Exceptional fit and finish. Delivered in a timely manner.
David Braun (verified owner) –
Awesome product. Have about 8 of these.
Armando Monteagudo (verified owner) –
Price is high
Michael L Adams (verified owner) –
Easy switch on my Atlas bipod.
Joe (verified owner) –
Good quality
Michael Pope (verified owner) –
Tried several bipods and never could find one I was super happy with. Talked with Ray from X-Ring and he suggested I look into Area 419. This Arca mount plus the atlas cal was a perfect match. Lock up is super tight no signs of it sliding around on the rail. I give it a 10/10
Anonymous (verified owner) –
Awesome product
Marco Leone (verified owner) –
Area 419 has the best and winner combination : incredible high quality products, innovation and fantastic customer service and support! Every time I need something new for my rifles to upgrade for a match or competition, I check A419 first! Thank you all for such a great company with great people!
Dave O. (verified owner) –
Excellent service and product. Thanks
Frank Benacquisto (verified owner) –
Works perfect
Andrew G. (verified owner) –
Very well made!
William Teat jr (verified owner) –
Excellant
Todd (verified owner) –
Awesome
Craig H. (verified owner) –
Awesome products. Quality is amazing. Will definitely buy parts I need from them again.
Jeremy Walker (verified owner) –
All my bipods I have rigged up with this clamp and they are very easy to use, durable, and look great
Andrew (verified owner) –
I’m not a huge fan of this arca mount. It will walk itself loose, even with low recoil 6.5 CM. I added a small ranger band to the knob for extra leverage. Get the QD lever version instead.
Quenton Chmelyk (verified owner) –
Perfect fit and form
Rod (verified owner) –
Perfect fit for my Arca rail.
Randy H. (verified owner) –
I love this clamp worth every cent it works smoothly and flawlessly very good quality.
James D. (verified owner) –
I should’ve gone with this when they first came out. Perfect conclusion to a finished project. I came back for seconds because of another project.
James D (verified owner) –
Bought one in combination with the 12” ARCALOCK Dovetail. Completed a .22LR Build with that combination. There’s not much I can say other than “wow!”. The lockup to the Rail with this Clamp. It’s solid. A quick adjustment and I got my Bipod wherever I need it to be or off completely. No more tools to change configuration. Wasn’t sold on the idea until I looked at Area 419. Spot on. I’m beyond impressed at how solid of a system it is. Soon as I received it, on it went, then ordered another of the same combination. Yes I now have two of them and a third is likely down the road. After all my projects are done, I’ll be running Bags and using a spare Chassis to tinker with ideas. Absolutely superb quality. More orders will be coming in the future for sure.
Brett Mccall (verified owner) –
Great service
Ryan Weeks (verified owner) –
Well built and works great!
Christopher J. (verified owner) –
Love it. 419 is best in the business. Have many of their products and this one lives up to and exceeded expectations just like all the others.
Andrew P. (verified owner) –
Exactly what I needed to go with my bag rider. Attached securely to my Arca rail!
Joel (verified owner) –
Quality part, seems to be sturdy so cannot wait to take it into the field.
Steve (verified owner) –
Great product
Robert Wooliver (verified owner) –
Awesome gun parts
Michael Palumbo (verified owner) –
Exceptional build and finish. Wonderfully executed contrasting color scheme.
Michael Nicely (verified owner) –
Beautiful workmanship!
Roger R. (verified owner) –
Great products from a great company.
Paul O. (verified owner) –
Quality build
Jack (verified owner) –
Just what I needed – Thank you
Mark D. (verified owner) –
Top quality for sure!
Andrew W. (verified owner) –
BRILLIANT NONSLIP CLAMP WORKS FANTASTIC
Jim M. (verified owner) –
Very secure when locked down on ARCA rail.
Anonymous (verified owner) –
Awesome item. I’ve got 2!
Karlyle Johnson (verified owner) –
Love it fit and finish is clean and it works great
Lee Jones (verified owner) –
Awesome product as usual!
MARK D. (verified owner) –
Works great and looks sweet. The ARCA Lock system is absolutely fantastic and want to upgrade all my rifles to have it. I’ve had too many occasions of not getting the tension right on my standard ARCA clamps and having my bipods shift. The ARCA lock system adjusts about as fast as a QD standard ARCA system but locks up perfectly.
Currently using this with their Harris Adapter on a Caldwell Bipod while I make a decision on whether to try out a real Harris or go with an Atlas or Accu-Tac.
STEVEN C. (verified owner) –
High quality and very well made. No corners cut with Area 419
David Thurber (verified owner) –
The design and construction are excellent. I bought this along with the picatinny rail to adapt a picatinny tripod to the Arca Rail on my new FX Panthera air rifle. It offers both a secure interface between bipod and rifle and an easy means of sliding the bipod along the rail.
William H. (verified owner) –
High quality product. Price was a little steep for what it is but it is the best.
Philip Johnson (verified owner) –
Great product!
Corey A. (verified owner) –
My second Arcalock clamp. Outstanding quality!
Jose R. (verified owner) –
Solid lockup when paired with Arcalock rail to load up a bipod
Dan (verified owner) –
It is sturdy and bolted right up
Robert (verified owner) –
great quality
Ryan P. (verified owner) –
Top shelf quality, just as expected.
Chris M. (verified owner) –
Superb quality. Like everything else these guys make.
Antonio G. (verified owner) –
These work so good that I had to buy another one.
Thomas C. (verified owner) –
Mounted to a Vortex tripod adapter. Not much use yet, but it’s secure. Don’t need to crank on it to lock the rifle in place since the rail has the notches. Should be appreciated when using winter gloves.
Anonymous (verified owner) –
Great clamp! Though, I only got his one because the black knob version was out of stock.
DAVID FIELD (verified owner) –
Very well made
Craig Myers (verified owner) –
Excellent product and quality
John B. (verified owner) –
Same thing, love that it locks in place!
David W. (verified owner) –
Great build quality, solid on a ARCALOCK rail and works on a standard ARCA rail too (followed AREA 419’s directions).
Verified Buyer (verified owner) –
Thought it wasn’t going to work the way I thought but actually made it so easy to use.
Bill M. (verified owner) –
Fit/finish is top notch, and product works well. Looking forward to purchasing more Area419 products.
Dennis Larsen (verified owner) –
Clamp is high quality, works great!
Verified Buyer (verified owner) –
Perfect fit and finish. Works just as is should.
Steve (verified owner) –
Quality is Excellent
Michael J. (verified owner) –
Some of the best quality I’ve seen. That will not be my only purchase
Peter Russell (verified owner) –
Great
Don Spencer (verified owner) –
Needed addition for bipod.
Chris W. (verified owner) –
Fits great on the 700 locks in perfectly even under recoil.
Wm Arnold (verified owner) –
Nice product
Eric S. (verified owner) –
Top notch quality
Michael T. (verified owner) –
Exactly what I needed…incredibly well made and perfectly functional
Rodger Gamblin (verified owner) –
N/A
JACOB (verified owner) –
High quality and what I was looking for.
George Smith (verified owner) –
The product was delivered on the promiseddate. I found all to be of the highest quality and workmanship. I know I paid a little more, but I got a lot for my money.
Anthony (verified owner) –
My 3rd one and it’s just as great as the others.
Anonymous (verified owner) –
SOLID BUY
Miranda A. (verified owner) –
Awesome, just what i needed
Anonymous (verified owner) –
Works fine on standard ARCA with pins
removed.
Steven H. (verified owner) –
Great fit and allowed me to use an Atlas bipod on my ARCA rail.
Trevor (verified owner) –
exactly as advertised
JOHN B. (verified owner) –
High quality product as usual. Works great !!
Jodi R. (verified owner) –
Works great. Fit and finish are perfect.
robert s. (verified owner) –
works perfect
David Mueller (verified owner) –
Great clamp
Jordi Claret M. (verified owner) –
La descripción es como lo que llega muy buen material
William Savery (verified owner) –
This was a life saver!!
Jordan Balzer (verified owner) –
Well made arca clamp! Everything area 419 makes is top notch!
Michael (verified owner) –
Works as advertised.
Patrick (verified owner) –
Nice clamp, could use a larger knob
Phillip Lenke (verified owner) –
Fine piece of machining works and looks great
Robert P. (verified owner) –
Fit like a glove
Thermon C. (verified owner) –
Experience but worth it
Anonymous (verified owner) –
Spendy but well made. haven’t used it yet. Feels and looks well made.
Michael K. (verified owner) –
What can I say, the machining craftsmanship on this is outstanding. The price point is just that, you absolutely get what you pay for. You will not be disappointed.
Richard D. (verified owner) –
Love the easy lock up with the Arcalock system. This clamp is an easy way to upgrade your Atlas bi-pod.
David J. (verified owner) –
This product is expertly machined and assembled. It attached to my Atlas bipod perfectly.
James Coleman (verified owner) –
Work perfect
Francisco dos Santos (verified owner) –
very good 😃 ++++
Kevin H. (verified owner) –
Perfect for my needs to mount my rifle to my Atlas bipod.
Richard D. (verified owner) –
Love the Arcalock system
Kirk (verified owner) –
Great quality. Fast shipping
Michael G. (verified owner) –
I have several of these great adapters.
Crystal Ramirez (verified owner) –
Arca adapter fits good
Frankie Lane S. (verified owner) –
Easy to use. Great quality. Adaptable from one ARCA rail to another.
Richard D. (verified owner) –
Stabler platform than pic on my Atlas.
Travin F. (verified owner) –
This is hands down my favorite way to attach accessories. Machining is on a whole other level than anything else out there! Works so well with bags, bipods, tripods I’ve lost track of how many I have.
MV USMC VET –
Problem solved! Removed the pic rail to attach the 419 and now I have a better positioning of my rifle. A must have! Suggestion to add different color knobs would be awesome. The clamp is super sturdy and I recommend it to everyone.
Kevin F. (verified owner) –
very nice clamp. I would prefer a QD instead of screw lock however.
Idan (verified owner) –
Fit and finish are great. Works well, I love how little you have to turb the knob.
Anthony Amantine (verified owner) –
If you have the 419 rail this is a must, and well made!
Chris williamson (verified owner) –
Awesome piece of equipment
Carlos (verified owner) –
Looks great and works as intended.
Eddie K. (verified owner) –
Love this item works great
Jakob Browning (verified owner) –
Well made and exactly what I was looking for.
Carter D. (verified owner) –
The clamp works perfect. It’s very well made and is built to last. It’s exactly what I wanted for my atlas bipod.
Dave Loughton (verified owner) –
Awesome
Kurt B. (verified owner) –
Excellent quality- works just like it’s supposed to!
Bryan (verified owner) –
Perfect! works great with my MPA arca rail.
Mark (verified owner) –
The Allen screws attaching the picatinny base to my Atlas were a little tight, but with a little oomph this clamp was an easy substitute
JERRY MCCUTCHEON (verified owner) –
Wish the screw pack came with it
Anonymous (verified owner) –
Fits the atlas like a glove, best mount out there!
Murray J Thompson (verified owner) –
Works perfect.
Wyle C. (verified owner) –
Fit and finish was what I expected and am very pleased with it.
Anthony Kuchynka (verified owner) –
These clamps are very well built and work well. I have a couple of them now and will continue to buy them as I get more things that need them.
Cayden Schoen (verified owner) –
Works wonderful with my atlas
ERIC D. (verified owner) –
Did exactly what I expected it too and I would say that the fit and finish of it was better then the expensive bipod it was going on!
Benjamin L. (verified owner) –
Secures nice and tight, and the knob screw is pinned so it can’t come out all the way and fall off. Excellent design!
Charles Laffitte III (verified owner) –
Easy to install and works great.
Tim (verified owner) –
Good fit and finish
Shane T. (verified owner) –
Is not compatible with most bipods
Craig Arnzen (store manager) –
Hey Shane, what bipod did you have compatibility issues with?
Danny P. (verified owner) –
Precision craftsmanship
Anonymous (verified owner) –
Quality craftsmanship! A++++
Laurie Tanner (verified owner) –
good product and fair price
Kris C. (verified owner) –
Excellent quality
Don B. (verified owner) –
Very good quality but priced pretty steep.
Tom Smith (verified owner) –
Great product and fast delivery!
Chad L. (verified owner) –
Paired with the picatinny adapter my atlas clamps right on. Great product.
Anonymous (verified owner) –
Nicely machined clamp, thank you!
Robert Potter (verified owner) –
Perfect addition to my Bergara B14R
Josh V. (verified owner) –
Excellently machined. No hassle attaching to my Atlas bipod. Locks up very tight to the arca rail.
Dwayne S. (verified owner) –
Amazing product. Saves you from buy another bipod. Love the lock feature this will not slide when you have it locked down.
Craig (verified owner) –
Exactly as shown on website. Clamps firmly on bipod and adjust as advertised on arca rail.
MARIUS MOCOFAN (verified owner) –
good fit
Nick Doucet (verified owner) –
Again fit and finish excellent
Jay Klaverweiden (verified owner) –
Well made, does exactly what it is designed to do.
victor coulter (verified owner) –
Very good
Kurt (verified owner) –
Very high quality piece that performs as expected.
Anonymous (verified owner) –
Added picatinny adapter to run Phoenix bipod
Kelly Breitweiser (verified owner) –
Awesome quality and a great product
Dallas S. (verified owner) –
Amazing quality
Michael R. (verified owner) –
great product ordered #2.
CL Luis Herrera (verified owner) –
that piece of equipment that when needed…you miss it
Kelly (verified owner) –
Easy to install. Works great.
Robert S. (verified owner) –
Terrific USA made product, it fits nice and tight and is easily adjustable and fast. The only problem is now I need to retrofit my other rifles and bipods. I will be buying more soon. It stands out as a very well designed and machined product.
Luis B. (verified owner) –
Nothing better than the bumpy edge of the A419 arca system paired with their clamp to prevent slippage and also prevent over tightening!!!
Fast shipping, all the screws and quality products!
Jorge (verified owner) –
Good quality
Mike Gilleland (verified owner) –
Works Perfectly
John W. (verified owner) –
Works great
Richard D. (verified owner) –
Let’s me move bipod all along the rail.
Bruce (verified owner) –
Can’t wait to put it to use!
James C. (verified owner) –
Clamp looks awesome, well made, high quality.
Paul H. (verified owner) –
Superior craftsmanship! Couldn’t ask for any better!
Reginald B. (verified owner) –
Awesome product, my second time purchasing.
Kenneth (verified owner) –
Great addition to atlas cal bipod, fit and finish is awesome!
Kyle (verified owner) –
Awesome product and the machining and finish are perfect!
Chris W. (verified owner) –
Easy controls
Diane Sonego (verified owner) –
I would rather have a lever nut than a thumb screw. Cant tighten very well.
Bob (verified owner) –
The perfect fit for the Arcalock. Area 419 makes excellent products.
Andrew F. (verified owner) –
I have ordered a few things from area419 and everything has been nothing but stellar quality and functionality. arca clamp locks up nice on the rail and easy to torque down with the knob. gold is a nice touch too.
CORY LAWRENCE (verified owner) –
Great quality very satisfied
Charles Patrick (verified owner) –
Great quality!
Randi C. (verified owner) –
Great product from AREA 419. Glad I decided to get it.
Tom G. (verified owner) –
This is a very well designed product and makes for an easy on off of a bipod or tripod.
Wendell Sullivent (verified owner) –
Outstanding quality
Daniel (verified owner) –
Exactly what I needed. Well made.
William Whitney (verified owner) –
Several months ago, I made two decisions. The first was to give an ARCA rail a try. The second was to buy yet another pricey tripod setup, all in the hunt for the rail & tripod system that I love. I chose an Area 419 Arcalock rail as the Arca test subject and a Vortex Radian Carbon Fiber tripod with pan/tilt ball head. Lastly, I put a Really Right Stuff 60mm Lever Release Clamp (B2-LR-II) on top of the Vortex tripod.
The tripod setup is the silent, velvet smooth, and sturdy and is my favorite of the five near $1000 tripod setups I own. The Area 419 Arcalock rail & the Really Right Stuff 60mm lever clamp are the perfect pair every shooter who utilizes a monopod, bipod, or tripod should try. I have found the setup I have zero desire to leave. The Area 419 Arcalock rail is extraordinarily well made. I have since put an Area 419 Arcalock rail on every long gun which I ever intend to use on a mono, bi, or tripod.
To facilitate the ability to quickly & easily connect & disconnect a mono or bipod to my long guns outfitted with the Area 419 Arcalock rails, I bought an Area 419 clamp & Picatinny/1913 Adapter for Arcalock clamps for every mono and bipod I regularly use (because each uses Picatinny to connect to a gun). Now, each of the mono or bipods I regularly use has its own clamp & pic rail adapter combo attached to it. The net result is the ability to connect or disconnect the desired mono or bipod to the long gun I’m using in a few seconds and the connection is silent and strong as a weld.
I promise you can’t go wrong with the Area 419 Arcalock rails and the equipment combinations described above. They will be my sole setups for countless years to come.
Danilo A. (verified owner) –
Great product, looking to purchase more once chassis has arrived
Martin T. (verified owner) –
Beautifully made. While not my first ARCALOCK clamp, I’m always impressed with the milling and functionality of this device.
Keith S. (verified owner) –
Area 419 products are excellent. Great performance, engineering, and craftsmanship. Best is they are never satisfied. Always learning and improving.
Paulo Santos (verified owner) –
Purchased the 12” Universal with the ARCALOCK Clamp. The clamp works great with the Magpul ARMS 17 Bipod. Very fast and easy to adjust. No complaints.
Keith p. (verified owner) –
Quality piece
Anonymous (verified owner) –
Also, the best arca rail clamps in the market!
Kelvin Walthall (verified owner) –
A+
Mike A. (verified owner) –
Great service, prompt response and excellent products
Bryon (verified owner) –
Works as advertised!
Phillip (verified owner) –
Expensive but worth the value.
George Yendrey (verified owner) –
Great quality and allows the use of my Atlas bipod on a new forend rather than purchase another.
Austin Word (verified owner) –
Fits perfectly
Dustin Powell (verified owner) –
Simply amazing
Anonymous (verified owner) –
If it was an ounce lighter for my application but works really good.
Donald F. (verified owner) –
Nice machined
Shane Devers (verified owner) –
Easy to setup, fits perfectly.
Adam G. (verified owner) –
Works great, exactly what I needed! Highly recommend!
Rodrigo Marchetti (verified owner) –
Perfect!
Jacob E. (verified owner) –
😉
graeme clarke (verified owner) –
excellent quality product
Henry Lonberg (verified owner) –
Just what I needed for my Atlas Bipod
Don Gilbert (verified owner) –
As expected
Henry Lonberg (verified owner) –
Just what I needed for my Atlas Bipod!
TJ (verified owner) –
Love it see above
John S. (verified owner) –
It just works, period.
Richard E. (verified owner) –
great product
Joseph D. (verified owner) –
Great product but a bit pricey.
Charles W. (verified owner) –
Pricey but an excellent bit of shooting hardware. I liked my first one enough that I bought a Cole-Tac Backbone frame since it comes with an Area 419 Arcalock clamp.
Roland van Zuijlen (verified owner) –
Works perfect!
Steve Beaudry (verified owner) –
Thanks
Michael H. (verified owner) –
Well built and totally satisfied!
John (verified owner) –
Smooth and great fit, locks in firm.
peter saladino (verified owner) –
thanks
Steven Smith (verified owner) –
What a gorgeous piece of machinery
Justin Rhodes (verified owner) –
Great product functions flawlessly
Anonymous (verified owner) –
Pricy but worth it
Shawn Pitts (verified owner) –
Very nice quality came with all hardware and tool for immediate install.
richard hoops (verified owner) –
Again just Awesome !
Dale A. (verified owner) –
Could not be better. Thanks
William H. (verified owner) –
Works great!
Richard (verified owner) –
Fit the Atlas bipod perfectly. The three screws allow it to lock into place with the Area 419 ARCA rail. Keeps the bipod close to the rifle.
Paul Kaelin (verified owner) –
A perfect fit
kris w. (verified owner) –
Thread could be changed to require fewer turns to make adjustments.
Jordan S. (verified owner) –
Awesome
Timothy Lange (verified owner) –
Perfect! High quality manufacturing!
Charles Nieman (verified owner) –
High quality
Anonymous (verified owner) –
Bought this to go from arca rail to bipod and quickly switch between guns. Works great. Beautifully machined.
Anonymous (verified owner) –
Amazing. Slick. Well built. Really speeds up barrier shots and much more stable than using a pod.
Kenneth Aycock (verified owner) –
Works great
Graeme Peirce (verified owner) –
Extremely well designed and finish on product is outstanding!
Paul L. (verified owner) –
Expensive but if it lasts a fair price.
Bryan McCravy (verified owner) –
Very nice clamp, functions perfectly.
Jarrid H. (verified owner) –
Easy to use
Landen J. (verified owner) –
Once setup, the clamp and rail is very solid. The clamp moves freely along the rail and locks in with the 419 rail. The rail and clamp adds extra versatility to the system. Install was easy for both the rail and clamp. I’ve already recommended it to a few guys.
Ryan Pierce (verified owner) –
Great product
Michael (verified owner) –
Superior quality!
Scott Turner (verified owner) –
Works great.
Frank Cesario (verified owner) –
Great design that fits perfectly to my atlas bipod and adjusts quickly anywhere along the rail.
Kevin A. (verified owner) –
Quality product… top notch
Bryce G. (verified owner) –
Products are great. Arcalock clamp works great. Picatinny rail adapter works great to. Quality machining. I had seen others using this product so I knew what to expect and what to get. Thanks. 4 star because I feel a tad high in price but I guess we all pay for what we want. But we all like a bit of a deal too. Maybe it was shipping that I didn’t like. Lol. Anyway. Thanks. It’s a great product.
Steve C. (verified owner) –
Works very well.
Zack Mozingo (verified owner) –
Awesome ARCA clamp. For perfect will definitely be using area 419 in the future
Carlo D. (verified owner) –
Great quality piece. The only thing that I would change is the size of the knob or to orient it so that it doesn’t prevent the use of the leg of my Atlas 5H. I am prevented from deploying the leg forward.
Otherwise the quality is top notch!
graeme (verified owner) –
Quality product
Anonymous (verified owner) –
Well made and functional. Would recommend.
Eric (verified owner) –
Excellent quality, works flawlessly
William (verified owner) –
Nice quality machining. Tight lockup and quick adjustments with arcalock rail
Eddie C. (verified owner) –
works just the way you want it
William Blake M. (verified owner) –
Great product.
Anonymous (verified owner) –
Perfect fit
Michael W. (verified owner) –
Rifle this will go on is still being built but the quality of construction is exceptional.
Zackary D. (verified owner) –
tight lockup and quick to install/jettison
Frank M. (verified owner) –
Excellent fit and finish holds very tight will never slip
Lee Houston (verified owner) –
ARCALOCK Clamp works great on my MDT ACC Chassis.
Mason (verified owner) –
Machined very well
James (verified owner) –
As a photographer, I’m very familiar w “Arca Swiss” components. The Area 419 Arcalock clamp takes every thing I love about that technology and adds a unique locking design specifically for resisting the forces seen in firearms usage. The form, fit and finish are outstanding as well!
JD (verified owner) –
Great item
Sean S. (verified owner) –
What an awesome clamp for my atlas bipod on my Daniel defense delta 5 with the built in arca rail. Such a slick set up.
Aaron M. (verified owner) –
Went right on my Atlas bipod and works very well with the arca lock rail. It allows for very fine movement on the bipod to get the perfect angle.
Anonymous (verified owner) –
I don’t like the gold knob
Frederick (verified owner) –
Despite the holiday and 2020 shipping insanity, Area-419 shipped and delivered the products promptly. The Arca rail adapter was easily installed and works exactly as expected. Thank you for producing and delivering the excellent products.
Anonymous (verified owner) –
Sweet clamp
Joseph G. (verified owner) –
Is this thing over priced? Yes.
Would I still buy it over the competitors reasonably priced poor manufacturing quality? Sadly yes.
Don’t blame them. Blame the market and lack of competition.
Anonymous (verified owner) –
Very pleased with Area 419 products. Area 419 Arca clamp and rails are by far the best I have seen and used.
Michael Sia (verified owner) –
Great product, But priced too high.
Derrek O. (verified owner) –
Quality product
CRISTIAN P. (verified owner) –
Good product
Mohamed Mahmoud (verified owner) –
Works perfect
Shawn C. (verified owner) –
Great product!
Stephen Young (verified owner) –
Would be nice if the screws were a bit longer or there were several sets that allowed other uses. The ones in the kit were pretty short. Otherwise, great product!!
Craig Arnzen (store manager) –
Any time you need something like this, just email! Happy to send you some longer screws as needed.
Johnson –
Best Arca Clamp I have owned.
Derrick warren –
These are awesome arca set ups very quick to adjust with a very tight lock up. You can adjust them on the clock very easily and you don’t feel like you lost that much time.
Jason –
Best ARCA clamp on the market. Rock solid.
Ryan –
Looks great and well made. The pins are removable for rails other than Area419 which is great!
Jim Misener –
Got this clamp for my Harris bipod, which I had previously run with a A.R.M.S. Clamp conversion for Picatinny, this clamp is every bit as solid as that clamp and the added adjustability is night and day, love the ease of installation, quality machining and especially the shape of the clamping knob, very easy and fast to make the necessary adjustments
Rick –
Bought this for my atlas psr about to buy a second great lock up no slip would highly reccomend
Brandon –
Area 419 delivers the upmost precision to any ARCA rail products! Never slips and easy to adjust!