ARCALOCK 8″ Universal Dovetail Rail
$80.00
** Rear angled barricade stop sold separately, available HERE
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.
Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*
Rail Features:
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp, will not damage bags or your hands.
– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp
– Rail is 8″ long giving you the entire length of the stock forend for attachments. The best part is, it still only weighs in at a paltry 3 oz
– Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Fits a MPA CZ455 chassis with no modifications
| Weight | .8 lbs |
|---|---|
| Dimensions | 16 × 2.5 × 2.5 in |
| Manufacturer | Area 419 |
1 review for ARCALOCK 8″ Universal Dovetail Rail
Add a review
Related products
James (verified owner) –
Does exactly what it’s advertised to do. Attaches to the MPA CZ455 BA lite chassis so you can have an arca rail.
It does not come with the correct screws to attach it so plan on spending time and money figuring out what screws you need. I ended up using 5/8″ Low-Profile 1/4″-20 socket screws with 1/4″-20 low profile nuts for the two holes near the mag well and 3/8″ Low-Profile 10-32 screws for the two holes towards the front. (I have a MPA spigot mount on mine.)