-
×
ARCALOCK Fixed Barricade Block
1 × $45.00
ARCALOCK Fixed Barricade Block 
ARCALOCK 14″ Universal Dovetail Rail
$120.00
In stock
Description
NOTE: Rail kits now come with only one action screw, and it is a longer screw. With the endless action/stock/chassis combos we found that nearly everyone was required to trim the screw for fitment anyway, so the longer screw makes much more sense. MLOK HARDWARE IS NOT INCLUDED.
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.
Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*
Rail Features:
– Universal rail design is the same footprint as our previous rail. (There were two revisions to the hole spacing, if you have a very early model your hole spacing may change)
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp, will not damage bags or your hands.
– 65 Locking positions available on the 14″ rail
– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp
– Serrated fixed rear barricade stop is same as before, but now we include an extension plug to raise it by another 1/2″
– Rail is 14″ long giving you the entire length of the stock forend for attachments. The best part is, it still only weighs in at a paltry 5.6oz
– Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.
– While designed with Manners Composite Stocks in mind, this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
– Spacers for rifle stocks with non-flat forends are available HERE
– Designed to attach to the rifle up to 4 places for maximum strength and stability.
– Extends past the end of most rifle stocks, allowing a further forward bipod attachment, increasing stability.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Rail comes with one Remington 700-style action screws of extended length to fit the rail to the front action screw attachment point. Some trimming will likely be required.
– A 3/4″ paddle bit and drill press may be required for installation of tee-nuts, depending on current rifle configuration. Tee nuts and hardware included.
Rail Weights:
14″: 156.03 Grams
12″: 111.5 Grams
10″: 95.2 Grams
8″: 82.5 Grams
Additional information
| Weight | .5 lbs |
|---|---|
| Dimensions | 16 × 2.5 × 2.5 in |
| Manufacturer | Area 419 |
Reviews (99)
99 reviews for ARCALOCK 14″ Universal Dovetail Rail
Related products
$185.00
$85.00
Roger R. (verified owner) –
Great products from a great company.
John B. (verified owner) –
The rail is a perfect fit on my Bergara B14R – cut the provided action bolt with a dremel (used a couple extra nuts on the bolt to keep the thread) after measuring against the original. You only need to remove a few threads.
Anonymous (verified owner) –
Easy to install, works like a charm for mounting a bipod or clipping in to a tripod. Seems to be rock solid so far.
COLE O. (verified owner) –
Well designed
Hans (verified owner) –
Great rail for my Waypoint 2020. Required a little mod to the included action screw but worked great!!
Anonymous (verified owner) –
Packed very well
Bob W. (verified owner) –
Great installation video
STEVEN G. (verified owner) –
GREAT
Alan Peterson (verified owner) –
Well made
Jose Prieto (verified owner) –
Works as described. Great quality
Daniel D. (verified owner) –
Beautiful craftsmanship. Solid and detailed.
Robert Merulli (verified owner) –
I own 3 of them. They work great.
John (verified owner) –
Excellent product as always!
Robert Potter (verified owner) –
Just as shown. Great addition to my rifle
Thomas N. (verified owner) –
Engineering, fit and finish is excellent.
James Johnson (verified owner) –
Amazing and very well engineered Arcalock rail, looks great on my rifle as well. The single long screw was easy to customize for the perfect fit. The baracade stop is definitely an added plus.
Wm Arnold (verified owner) –
Nice product
Shawn W. (verified owner) –
Figment was perfect. No need to drill any new holes for my Kimber 8400 tactical with a McMillan stock.
Jordan (verified owner) –
Great, product
Joseph Ware (verified owner) –
Love this thing… will order another!
Rodger Gamblin (verified owner) –
I know it would install differently on any gun but I was disappointed in the lack of how to information on the 457 match rifle I purchased with the nice walnut stock I bought!
It would be nice if there would have been a stick on template??
Timothy (verified owner) –
Once I figured how I wanted to mount it, it’s everything I needed… More purchases in the future!
Timothy Rawcliffe (verified owner) –
I’m an Area 419 fanboy. There products are made incredibly well and most importantly, they work. Rail was mounted on CZ 457 incredibly easy. Watch the Area 419 YouTube video for reference
Sean P. (verified owner) –
Installed this on my Bergara BMR for competition. Makes a world of difference during the various stages. Planning to install on other rifles for versatility.
Vincent (verified owner) –
Just what I need!!!
Anonymous (verified owner) –
GREATE QUALITY
Randall B. (verified owner) –
Mounted it on my CZ 457 MTR using the tee-nuts. The installation video was a big help.
Anonymous (verified owner) –
Product as advertised! Straight forward to install. Excellent machining and quality!
Installed on my CZ 457 LRP.
Omar Armas (verified owner) –
Amazing quality
LEALAN MCSPADDEN (verified owner) –
Absolutely love the products, even the packaging was great!!!
Phillip Lenke (verified owner) –
A real piece of art
Robert W. (verified owner) –
Great product!
Chad C. (verified owner) –
Awesome rail. A little tricky to install on Magpul stock(my entry level prs riffle) usually shoot nrl22. I have your arca rails on most of my guns👍
Frankie Lane (verified owner) –
After purchasing a customized CZ457 Varmint from Area 419 and experiencing this style of Arca Rail, I installed them on six of my rifles. Great product!
John L. (verified owner) –
Quality A+
Kevin F. (verified owner) –
works great! I love it.
Dallas Scott (verified owner) –
World class perfection. Every rifle I own now wears one
Carlos (verified owner) –
The product looks and feels amazing. Haven’t installed it yet but will be doing it later this week.
Mark G. (verified owner) –
great product was fast and easy to install and works great on rifle and gets a lot of looks at the range as a great platform for rimfire rifles
Brian Melton (verified owner) –
Great craftsmanship and fit!!
Charles Laffitte III (verified owner) –
The arca rail was easy to install.
David (verified owner) –
Excellent
Kris C. (verified owner) –
Great quality, install video for cz457 could be updated to show a better description of install. Had to knock out T nuts to drill hole deeper to get threads to start.
Christopher O. (verified owner) –
I’m very excited to but this on. Looks good.
David Barnard (verified owner) –
Quality is perfect as expected
Randall M. (verified owner) –
Definitely a game changer. Mounts perfectly just wish they made this one in the weighted.
David Phillips (verified owner) –
Little high but worth the money.
Brian (verified owner) –
No complaints!
Derek (verified owner) –
Love these this is my third one. It’s so solid and I can place bipod or other attachments anywhere along the rail.
ospreytrainer01 (verified owner) –
Put the 14″ with barricade stop on my 22″ christensen arms mpr with 4 mlok screws/nuts, fit great and almost runs full length of the rail. Awesome upgrade.
John H. (verified owner) –
You Area419 folks are awesome! I absolutely LOVE my Area419 ARCA rails, 22 scope rails, bipod adapters and muzzle brakes. Your products just work. I have 4 of your rails, 2 22LR scope rails, 2 harris bipod barricade adapters and 3 muzzle brakes (Hellfire Match in 2x .30 & 1x in 6.5). I’ve adapted all the ARCA rails to older XLR chassis’ and right now I swap bipods. Your specific ARCA rail is great because the ARCA rails are so consistent between trainers and match guns, and with the locking system, they NEVER slip. I’m just now getting into the Hellfire muzzle brakes and so far, I’m impressed. You guys make innovative and top notch equipment that I’m proud to use. Thanks a bunch and please keep it up…
Dallas S. (verified owner) –
Perfect fit
Nick N. (verified owner) –
Ace Arca rail!
Brent (verified owner) –
Not sure about the serrated edges on the rail yet. They are not sharp, but are not very comfortable in the support hand. Probably will not be an issue as this will almost always be shot from a bench and supported by bag or bipod.
Chris (verified owner) –
Great product and very useful. Only 4 stars because of the price little steep for what it is.
David P. (verified owner) –
Planned to mount on a Vudoo Ridgeback. The rail didn’t allow clearance for the bottom metal or follow the stock very well.
Eric D. (verified owner) –
Great rail … top notch!
Norman Shanley (verified owner) –
very happy with products and service for sure
Michael Frandsen (verified owner) –
Always the best
Tong Xiong (verified owner) –
Great videos on showing how to do installation.
Steve B. (verified owner) –
That makes shooting anywhere so much easier.
Edward S. (verified owner) –
Fit perfect on my CZ 457 MTR
Larry McCormack (verified owner) –
Very well thought out product. A quality piece for sure. Thanks guys!!
Gregory R. (verified owner) –
I mounted this rail on a CZ 457 Varmint MTR. Not being a wood worker I didn’t take into consideration the thickness of the stock when installing the T-nuts so the included screws were too short. No problem getting longer screws at the hardware store and all is good.
Brandon (verified owner) –
Installation is a breeze.
Anonymous (verified owner) –
Well engineered and manufactured product. The addition of the locking method and their clamping screw is fantastic and very innovative.
Curtis Landrum (verified owner) –
So ordered 2 of these for Begara B14R’s for me and wife. These rails are awesome and fit just fine. Do make sure to use a metal or straight ruler that you know is correct. Tape measures can be inaccurate. Fit and finish is great, bolts work where they are supposed to. Do know that Allen heads will change with this upgrade for the front action bolt. Easy to install, just make sure you have a way of measuring inch pounds when tightening action screws back up.
Dustin Stevens (verified owner) –
Nice peace of equipment, love it!
JARED S. (verified owner) –
Great, product, however it does not have the two screws that are in the video for additional equipment coming soon on youtube.
Bryon (verified owner) –
Love the product but didn’t care for the lack of instruction. I had to do some engineering to make it work. Never having drilled into a synthetic stock I felt a bit unsure. I reached out to Area419 for help and didn’t get any. So I found an example, not exact but close to my rifle.
My main help came from asking a group called Pursuit of Accuracy who provided some pics and some instructions. I do like the product.
dusty r. (verified owner) –
Product is outstanding!!!
Jerry C. (verified owner) –
I ended up using a 12″ rail and customer service took great care of me as always
Donald F. (verified owner) –
First ARCA rail I have ever used and it will not be my last made by this company!
Art (verified owner) –
Fantastic product very well-made
sergio (verified owner) –
excelent
John Metcalf (verified owner) –
Craftsmanship is unbeatable.
Charles W. (verified owner) –
A great rail. Instead of using the enclosed T-nuts, to mount on my CZ457, I used the nuts that come with standard 10-32 sling swivel studs and bought some 1” 10-32 low cap screws to mount the rail. The 10-32 screws in the kit were a tad too short for my need. FYI an old Stanley #59 doweling jig was used in lieu of a drill press and the hole to fit the locking nuts was done with a counter sink for wood screws. Not perfect, but the enemy of good is better.
Patrick S. (verified owner) –
Fit and finish second to none
Ryan Mulder (verified owner) –
Not a fan of having cut to fit bolts. Ordered proper size for Manners stock.
Charles Slingerland (verified owner) –
Awesome Addition to my LRP
Zach D. (verified owner) –
I won’t own another rifle without this rail, the absolute best solution for bipod, tripod, and barricade stop mounting on the market.
Jason Ford (verified owner) –
Quality at its finest
Scott Shreve (verified owner) –
Great system, easy to mount, all hardware included !
Brandon F. (verified owner) –
Fast email response..
Devin K. (verified owner) –
I have these on all my rifles. great product!
Scott Turner (verified owner) –
The integrated barricade stop is awesome and I like how the supporting ARCALOCK clamp gives you bag or bipod a solid attachment. No more worry about attachment movement on the COF
Kevin A. (verified owner) –
Quality product, top notch….
TODD GRIMM (verified owner) –
Awesome product !
Ronald W. (verified owner) –
I have this on all my rifles now
Anonymous (verified owner) –
Can’t beat it.
Bennie (verified owner) –
action screw was too long for the Bergara B14 HMR
Craig Arnzen (store manager) –
Hey Bennie, the action screw included with the ARCALOCK rails is too long for about everything, as trimming a screw is much simpler than stretching one! Here is our tutorial on how to trim that screw to length: https://youtu.be/XregNm5dv7E
Doug T. (verified owner) –
Awesome quality! Have 2 of these now.
James S. (verified owner) –
Super high quality and fitted my manners stock perfectly. The long action screw was east to cut to exact length.
Jon (verified owner) –
Very well made and the RRS BTC pro clamp locks up tight. Very happy with this purchase.
Michael Newton (verified owner) –
This is the 3rd Area419 Arcalock rail that I own and I will be purchasing more. I use these for 3gun and am getting into NRL22 and PRS. In my opinion the Area419 Arcalock is the best Arca rail on the market. Bipods and bags lock down solid and remove with ease. Craftsmanship is excellent and the team at Area419 will get it to you fast.
James Boles (verified owner) –
I like how much travel my bipod has know this enables easy setup around stages love it thanks.
William L. (verified owner) –
Easy installation with website instructions
Chris (verified owner) –
Great Product
Derrick warren (verified owner) –
Once I got into PRS I realize that arca rails are an absolute must. I have two of these rails ones on my 22 and the others on my dasher. The quality is excellent and There fast to adjust. You won’t be disappointed.