TASK – Tactical Application Sight Kit – Builder

BUILD YOUR KIT HERE, AND BE READY FOR YOUR MISSION – WHATEVER IT IS

How to Build Your T.A.S.K. – READ THIS BEFORE YOU ORDER, IT WILL TAKE 2 MINUTES AND SAVE POTENTIAL PROBLEMS

1) Begin with the center section – it has to match your optic. Then you’ll select a low or high height. This mostly comes down to how you use the platform, with more of a cheek weld (low), or in heads up (high). This can also be impacted by the nature of your kit and structure of your face.
2) For the front attachment, you’re generally going to want enough clearance to wrap your hand around the handguard, and not have your device interfere (blooming off the thumb is no fun). If you are using a “High” center section, this tends to be less of a concern, and you are likely to be safe with a standard “Long Diving Board”. If you are selecting a “Low” height, you are most likely going to want the “Offset Long Diving Board” which lifts up the surface of the board, allowing for more clearance.
3) For the rear attachment, if you’re running a flip-up magnifier, you likely want a “Short Diving Board”. If you don’t have anything you place behind the main optic, you don’t need anything here.

Introducing the TASK – Tactical Applications Sight Kit – from Area 419.

When building your sighting system for a carbine, there’s no room for shifting or walking of your laser or clip-on device. That means you need to get it off the handguard, and onto a rigid platform. The TASK allows you to do this in thousands of ways, meeting exactly your preferences and requirements.

Built to be more rigid, more configurable, and more modular than any system on the market, the TASK is built around a new patent-pending attachment point between our center sections and attachments.

With more than 5,400 possible configurations, and more on the way, the TASK is ready – no matter whatever your mission calls for.

KEY FEATURES
– Milled on 5-Axis machining centers, ensuring the highest possible level of consistency
– Constructed with aerospace-grade 7075 aluminum and custom stainless steel hardware, all from US Mills. No junk Chi-com sourcing, passed off as American
– Allows for front and rear attachments on all models (SEE ATTACHMENTS HERE)
– All models (except for the low pic-style) allow for MATCH mounting point accessories, including levels, offset optics, and cable management clips
– Patent-pending attachment points for front and rear attachments, resulting in an incredibly rigid and modular system

MOUNT HEIGHTS

Micro, Acro, RMR, and MRO mounts should product an approx dot height, above the host’s pic rail of LOW (2.25″) and HIGH (2.90″) with some allowable variation for specific red dot models.

The pic riser style will produce an approx dot height of LOW (2.25″) and HIGH (2.63″) with an EOTech XPS or a LOW (2.50″) or HIGH (2.90″) with EOTech EXPS or other Lower 1/3 pic-mount dots.

MOUNT COMPATIBILITY (Includes, but not limited to)

MICRO:
Aimpoint Micro
Holosun 503
Primary Arms MD-21
Sig Sauer Romeo4, Romeo5
Vortex Optics Crossfire, Sparc AR, Sparc Solar

ACRO:
Aimpoint ACRO (C1, C2, P1, P2)
Steiner MPS

RMR:
Holosun 407, 507, 508
Trijicon RMR, SRO
Primary Arms PLx HTX-1

MRO
Trijicon MRO Patrol, Patrol HD