Remington 700 Long Action Improved Scope Rail (ISR-LA)
$100.00
At Area 419 we decided that there were no scope bases on the market that really met our requirements for quality, so we made our own. Its all in the little details that set this base apart from the competition. These are machined in house on our 4-axis HAAS VMC from 7075 Aluminum. Straight off the mill there is not a single sharp edge left, all corners are radiused and any necessary harsh corners are chamfered. Just like all of the other Picatinny products we make, we radius between the slots, and also radius the corners of the lugs to prevent any snag areas and give it a cleaner look.
- Integral machined in recoil lug bears against the front receiver ring to prevent any base shifting under recoil
- Available in two versions, “Full Slotted” and “ARC Top”
- Full Slotted is compatible with all picatinny scope mounts including Spuhr and MPA which have a recoil lug in the center of the mount
- ARC Top is an Area 419 original design, mainly for aesthetics just to set it apart (will not work with mounts like Spuhr or MPA)
- Compatible with #6 and #8 screws, no modification necessary
- All mating areas are 1:1 surface machined to exact profile of the Remington action for a solid fit
- The MOA angle of the base is guaranteed to be true to the spec due to advanced fixturing
- Machined to MIL-STD-1913
- Ejection port cut blends seamlessly into action and gives plenty of room for top loading ADL style rifles
- Type III Hardcoat Black anodized
- (4) 6-48 and (4) 8-40 Torx T10 screws and wrench included
- All screws are the same length and sized to not interfere with barrel threads, no more guessing which screw goes where
- #6 Screws = 15in/lb
- #8 Screws = 20in/lb
| Weight | .2 lbs |
|---|---|
| Dimensions | 8.25 × 1 × 1 in |
| Manufacturer | Area 419 |
| MOA | 20 MOA |
| Style | Full Slotted, ARC Top |
24 reviews for Remington 700 Long Action Improved Scope Rail (ISR-LA)
Add a review
Related products
Sale!
Out of stock
$920.00 – $1,070.00
Sale!
$200.00 – $220.00
Out of stock
TREY (verified owner) –
Excellent machining, fit to rem 700 action better than a badger previously installed. Highly recommended.
Ryan Backlas (verified owner) –
I’ve been through quite a few scope rails, generally in the same price range as well. Never had one that I didn’t have to bed, until I purchased this one. The fitment is spot on!
Timothy R. (verified owner) –
Put the 20moa rail on my Bergara Terrain. I bolted it down with both rear screws to see if it needed bedding. With the screws tight the front of the rail still laid flat on my receiver. I put loctite on the screws and torqued them down. The rail also has a integrated recoil lug that fit snug up against the receiver, no having to push the rail against the receiver and then tightening. I am a machinist by trade and this is a very nicely machined part, not a single sharp edge anywhere. For the money i don’t see ever buying from anyone else in the future.
Alex D. (verified owner) –
Great quality product.
Mike Schultz (verified owner) –
Quality product
Anonymous (verified owner) –
Great product
Chad C. (verified owner) –
Great fit and looks great too. I ordered a short action rail for a different gun I liked it so much.
Frank M. (verified owner) –
Very well made and secure on the rifle
Frank Mefford (verified owner) –
Excellent nice fit on my clone agera Ridgeback thanks again area 419
Anonymous (verified owner) –
Working fine so far
Cody T. (verified owner) –
Mated up Flawlessly to the Bergara Premier Ridgeback 28 Nosler. These guys take pride in their product. I highly recommend this rail over several other top-tier companies. Lots of Features for the $; and will be buying more for future builds. Topped off with Hawkins rings that fit like a glove.
Michael M. (verified owner) –
Perfect for for my Bergara Premier HMR Pro in .300 PRC! Solid as a roach with both sets of screws to mount!
Ryan S. (verified owner) –
Really nice well fit base with an updated design. The value is outstanding I would expect to pay 150ish for something like it. I was hesitant to buy something besides my go to brand but I’m glad I did.
Lawrence (verified owner) –
It’s a rail. Really not much else to say. It is exactly what it is advertised as. A 20 MOA rail. Unique design, looks nice. No problems with operating. No interference when extracting casings. Works how it should. Would purchase again.
Tyler Varner (verified owner) –
Great product beautiful machine work grade A stuff not mine first one I’ve bought, only thing I didn’t like this is my first LA, my 3 SA ones have “419” engraved on them just a cool touch doesn’t take away from the quality of part any just was a cool feature on my SA ones! Great product as always!
Andy Williams (verified owner) –
Great machining and excellent fit
Joey Matos (verified owner) –
I am going to recommend Area 419 to all my friends
Anonymous (verified owner) –
Looks great
Mike R. (verified owner) –
again Rating it a 5 but still on the work bench
Caleb (verified owner) –
Great product as usual with 419
Christer Amundsen (verified owner) –
Great machining
Nicholas (verified owner) –
I was concerned about this fitting on my CA Ridgeline in 300PRC. The folks at Area 419 assured me that it would and it fits perfectly. Very well made. My Spuhr mounted beautifully to it and I am ready to go!
Scott Pitts (verified owner) –
Heads on two of the #6 screws rounded while torquing to spec
Michael (verified owner) –
The rail is great but the screws are cheap, I had to do some work on 2 of them to get them to start threading into the reciever