Dust Cover for ZERO Reloading Press
$70.00
In stock
Your ZERO is an investment – why not protect it? These dust covers are high-quality felt-lined covers, made by a shop known well in the radio/stereo equipment world. They are sized to fit your press with a turret full of dies, and can be used with any mount/riser.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 2 in |
65 reviews for Dust Cover for ZERO Reloading Press
Add a review
Related products
Out of stock
Sale!
Sale!
$450.00 – $650.00
Robert Merulli (verified owner) –
Nice product. Have one for my v3 also.
Michael M. (verified owner) –
Very nice cover. Well worth the small investment to protect the press.
Jason H. (verified owner) –
Excellent quality now just waiting on the press
Ernie L. (verified owner) –
There is nothing wring with the product, just a little over priced for what you get.
Kevin C. (verified owner) –
Item received as described and happy with the material, construction & design.
Sonny Marquez (verified owner) –
Fits like a glove
Raymond Harris (verified owner) –
Very nice cover.
Michael Klan (verified owner) –
Only good for naked press. Once you install a system- especially a powder thrower it will only fit badly. Should be a bit larger…
Craig Arnzen (store manager) –
The cover was designed to work with a naked press, or one with standard sizing/seating dies.
Justin (verified owner) –
The quality of the cover is top notch just like everything from Area 419!
Anonymous (verified owner) –
Great fit; easy to take cover off and place back on.
DAVID (verified owner) –
Nice fit and finish.
Gustavo A. (verified owner) –
Must have!
James R. (verified owner) –
works as intended
Richard Boyle (verified owner) –
A great complement to the press but a pillow case also does the job. This is beautifully done however and adds a bit of professionalism to the shop.
Shawn P. (verified owner) –
Must have accessory.
Patrick Paquette (verified owner) –
I like the press cover keeps everything nice and clean fits well.
Mark Hohenberger (verified owner) –
Nice but a little bit on expensive side for it
Craig Arnzen (store manager) –
Sourcing these from another American small business comes at a cost. We could sell them for a fraction of the cost if we went to China, but that’s not going to happen.
David Watts (verified owner) –
nice quality cover
Robert W. (verified owner) –
Great cover. Easy on and off.
Jim Laverty (verified owner) –
Nice looking cover
Thomas (verified owner) –
The cover is very well made.
Kevin M. (verified owner) –
Very well made, nice thick material and the logo looks great as well. Need one for my Autotrickler next.
Kenneth Longo (verified owner) –
Great!!
Sal (verified owner) –
Protection for the Zero
Brian Smith (verified owner) –
Great Protection
Roger Thedens (verified owner) –
Its a cover
Todd Van Dyke (verified owner) –
Fits great!
Igor Pichkov (verified owner) –
Sturdy and nice addition to the heavy duty press for the rare times when the press idles
Steven Sims (verified owner) –
By the dust cover it is extremely well made.
Brian B. (verified owner) –
Finally in stock to protect my Zero press when it’s not in use! Fits perfectly and looks much nicer than the Dillon cover on the 550 sitting next to it on my bench.
Anonymous (verified owner) –
Works well great fit
Micheal W. (verified owner) –
Sorry guys it’s a little overpriced for what it is but it looks cool and keeps the dust off so I guess realistically it works
Craig Arnzen (store manager) –
We could import them and sell cheaper while making more, but these are hand-made by an American small business. We think it’s worth it for everyone.
Robin Retzloff (verified owner) –
It is well built, but I purchased it not aware that it would not work well with the die holder attachment. It will need to be modified to fit appropriatly or the die holder removed. I am using it with the Bad Dog press holder
Larry Foor (verified owner) –
Great dust cover! But I wish it covered the handle as well.
MYRON (verified owner) –
Perfect fit.
M A Matteson (verified owner) –
Nice cover.
Garry (verified owner) –
The Dust Cover fits like glove and looks fantastic
Nicholas Tubito (verified owner) –
Much nicer than I anticipated
Bobby (verified owner) –
Great quality 👌
Edward (verified owner) –
Cover is nice.
Thomas F. (verified owner) –
It fits nicely and keeps everything clean
Rob Blair (verified owner) –
slick cover for my zero press!
Chris Williamson (verified owner) –
Awesome Quality
Warren W. (verified owner) –
A perfect addition to an already awesome product!
James R. (verified owner) –
A bit pricey but very high quality.
Andrew Coil (verified owner) –
It fits well and provides great protection. Looks great too.
Omar (verified owner) –
Great Addition for Press!
John Williford (verified owner) –
Good fit and high quality
Doug Krogh (verified owner) –
Quality product
kevin l. (verified owner) –
👍🏻
Frankie Lane Schipula (verified owner) –
Excellent fit and finish
Kevin (verified owner) –
Well made, covers turret nicely.
Michael (verified owner) –
Great product fits nicely on my press
Donald DeBord (verified owner) –
Nice cover very well made fits perfectly! A+++
Tim K. (verified owner) –
Great
Scott B. (verified owner) –
Great Product.
Carl O. (verified owner) –
Cover keeps dust off the press.
Anonymous (verified owner) –
Awsome
Joseph Stone (verified owner) –
Fits & looks great!
Patrick M. (verified owner) –
Completes my bench.
Phil Harper (verified owner) –
Great cover
Mike (verified owner) –
Nice cover
David A. (verified owner) –
Perfect!!
Jacob J. (verified owner) –
Fits good and looks good too
Chris Kinsey (verified owner) –
Excellent quality!