Sale!

Dust Cover for AnD FXi Scale with Auto-Trickler

Original price was: $75.00.Current price is: $65.00.

Description

We all have a lot of money wrapped up in our powder dispensers – why not protect them? These dust covers are high-quality felt-lined covers, made by a shop known well in the radio/stereo equipment world. These are available in two heights (18.5″ and 22″) to fit FX120i scales with our hoppers from DramWorx. They are wide enough to cover your trickler, and have a flap cut into the back to allow cords and cables to rest easy.

If you’re ordering this along with a new upgrade kit, all kits are now being shipped with the shorter hopper, so you’ll need the short height cover.

 

Weight 1 lbs
Dimensions 10 × 10 × 4 in
Height

Tall (22" Internal Height), Short (18.5" Internal Height)

54 reviews for Dust Cover for AnD FXi Scale with Auto-Trickler

  1. Mark F. (verified owner) –

    Nice cover, great fit

  2. Michael Riksheim (verified owner) –

    This is great to cover my autotrickler. Now I will have to see if the larger one will cover my amp mate when not in use

  3. Bronson (verified owner) –

    This is a necessary evil imo. It is big and bulky but it does keep dust and air particles out and that is important to me.

  4. Andrew L. (verified owner) –

    Cover is abit too long and not snug

  5. Toby P. (verified owner) –

    Works perfect and fits great

  6. James Ash (verified owner) –

    Excellent cover for my v4 scale/trickler. Extremely well made and fits perfectly. Thank you!

  7. Arthur Morgan (verified owner) –

    Beautiful, heavy, should last forever, however even the smaller 18″ cover is way too large, fully usable just big!

  8. James Chisom (verified owner) –

    I love the are 419 dust covers to cover my scales and presses.

  9. Anonymous (verified owner) –

    Very well made

  10. Richard Aitchison (verified owner) –

    Best purchase highly recommended

  11. Dragos Cojocaru (verified owner) –

    Love it!

  12. shawn f. (verified owner) –

    Best cover available

  13. Michael J (verified owner) –

    Even better quality than I had hoped for…top notch protection for my product investment.

  14. Jose S. (verified owner) –

    Extraordinary service and support. Super products.

  15. Robert Wyatt (verified owner) –

    Quality worth the price!

  16. Richard Kirik (verified owner) –

    Sturdy, attractive well made cover. Soft lining. I purchased the taller version for my V4 AutoTrickler, it’s a little tall for that application but I just fold the bottom. Do not hesitate to purchase this cover, you will not be disappointed!!

  17. Lance H. (verified owner) –

    Very nice cover.

  18. Mark M. (verified owner) –

    Ended up cancelling (not in stock).

  19. Ryan Thurman (verified owner) –

    Great cover, wish I had one for all my equipment

  20. Michael P. (verified owner) –

    Perfect fit, it will provide years of protection for my Auto-Trickler

  21. Carl Valderama (verified owner) –

    The short cover with the 18.5″ height fits perfectly over the AutoTrickler V4. I haven’t had any issues with the rear panel interfering with any of the V4’s signal or power wires.

  22. Thomas F. (verified owner) –

    It’s well made and does what it is supposed to do – it keeps my Auto Trickler V4 clean which protects the scale and protects all delicate parts.

  23. Marshall (verified owner) –

    Quality of materials and craftmanship is 5 stars. The reason I am giving it 3 stars is because the fit is not great for a supposedly custom made auto trickler setup. For a custom cover this thing is very loose. There is a ton of room on all sides and it does not fit around the powder hopper very well. Just too big ang baggy for a custom fit cover. It does the job well though and keeps dust out of the system.

  24. Donald DeBord (verified owner) –

    Nice cover never go cheap with that expensive scale and V4 trickler.

  25. Billie Hernandez (verified owner) –

    Quality product at a great price!!

  26. Richard Drake (verified owner) –

    nice

  27. Darryl Blosser (verified owner) –

    Well made and a perfect fit, don’t change a thing.

  28. Bradley (verified owner) –

    Great Quality

  29. William Glanden (verified owner) –

    Quality is good and properly covers my powder dispenser.

  30. Jason (verified owner) –

    Great product and excellent quality, but needs to be a little smaller. The height is perfect, but it’s bigger than needed around the base. Maybe the older units were bigger, I have a V4. It overhangs the base by about 4 inches.

    Image #1 from Jason
    Image #2 from Jason

  31. Stephen Merchent (verified owner) –

    Nice!

  32. Anonymous (verified owner) –

    Great cover for my Auto-Trickler

  33. Shawn P. (verified owner) –

    Essential component for an expensive system.

  34. Edward (verified owner) –

    When I first looked at this cover, I thought it was a bit pricey. So I held off ordering one to see if I could a cheaper alternative. I finally ordered it when I couldn’t find a cover that would work with both my A&D fx-120i scale and the Auto Throw/Trickler. What you get for your money is worth the extra expense. This cover is made exclusively for a A&D fx-120i/200i scale with a Auto Tricker/Throw installed. The cover is well made from a heavy high quality padded fabric. It’s also much larger than I expected it would be. It has plenty of room to cover my A&D scale with the Auto Throw attached on top and the Auto Trickler off to the side of the scale. 5 Stars! I highly recommend this cover.

  35. Wendell (verified owner) –

    Great quality product to cover my scales! Had them in stock, no waiting!

    Image #1 from Wendell

  36. Clay Toole (verified owner) –

    I have 2 of the 22” covers and they fit perfectly over my Prometheus and amp with ampmate on top!

  37. Ron V. (verified owner) –

    Every AREA 419 item that I purchase, is exceptional.

  38. JOSEPH C. (verified owner) –

    The cover is great to keep the scale and the Auto-throw/trickler clean from dust. Only thing is have an issue with is its really flimsy and there’s no support for the cover other then itself to stand up over the scale, thought it would have a small wire frame for rigidity.

  39. Chase (verified owner) –

    Highly recommend this cover it’s worth the wait if it goes out of stock. It’s a must have for this setup.

    Image #1 from Chase

  40. Gerald (verified owner) –

    Dust cover is excellent quality and true to size and fit.

  41. Kevin M. (verified owner) –

    Very nice construction just like my zero press cover. Height is perfect for v4. I think I will install a wire frame inside of the cover so it is rigid and sits over the unit more like a box.

  42. Lee (verified owner) –

    Well made and perfect for the autotrickler and A&D FXI 120 scale combination

  43. Weiyao (verified owner) –

    Nice piece for your expensive scale.

  44. Clay Toole –

    I have a Prometheus with the Pyrex hopper and wanting something to protect it. Would this fit so I could match my zero and cover?

    • Craig Arnzen (store manager) –

      Email Stan(at)RadioDustCovers(dot)com – he makes these for us, and also does custom work.

  45. Roy Smit (verified owner) –

    Be careful with the cords, its to thick!!

  46. Todd L. (verified owner) –

    Fits perfect and well made

  47. Jake L. (verified owner) –

    Cover is stout for what it is. Feel a lot better having purchased it to protect scale and components.

  48. Mike C. (verified owner) –

    Thi is handy, looks professional and cleans up the cluttered appearance of a loading bench. Not to mention that is keeps your investment clean and ready to use.

  49. Erik C. (verified owner) –

    fits perfect looks great and is much better made than what I was expecting. It initially seemed as if $70 for a fabric cover was a lot when I received it I understand why it is made very very well not some cheap thrown together piece of Chinese junk.

    • Craig Arnzen (store manager) –

      These covers are hand-made by a small US business! It makes them cost a little more, but it’s worth it.

  50. MARK (verified owner) –

    Very nice

  51. Jason H. (verified owner) –

    Excellent quality

  52. Kevin C. (verified owner) –

    The fit, feel and function is spot on, as expected with Area 419. Very pleased.

    Image #1 from Kevin C.

  53. papezyk a. (verified owner) –

    Good item ,best quality

  54. Darren I. (verified owner) –

    Works awesome keeping auto trickler dust free

Add a review

Your email address will not be published. Required fields are marked *

Related products

Sale!
+
 This product has multiple variants. The options may be chosen on the product page

ZERO M-Series Die Sleeve and Mandrel Kits

Original price was: $160.00.Current price is: $140.00.
Sale!
+
 This product has multiple variants. The options may be chosen on the product page
Out of stock

Area 419 ZERO Headspace and Ogive Measurement Gauge Kit

$275.00 – $325.00
Sale!
+
 This product has multiple variants. The options may be chosen on the product page

M-Series Shellholders

Original price was: $60.00.Current price is: $50.00.
Sale!
+
 This product has multiple variants. The options may be chosen on the product page

ZERO Sizing Die Mandrel Kits

Original price was: $145.00.Current price is: $120.00.
Sale!
+

ZERO Turret Dock

Original price was: $75.00.Current price is: $60.00.
Dust Cover for AnD FXi Scale with Auto-Trickler
Original price was: $75.00.Current price is: $65.00. Select options