Tikka T3 Standard Action Improved Scope Rail
$80.00
Description
At Area 419 we decided that there were no scope bases on the market that really met our requirements for quality, so we made our own. Its all in the little details that set this base apart from the competition. These are machined in house on our 4-axis HAAS VMC from 7075 Aluminum. Straight off the mill there is not a single sharp edge left, all corners are radiused and any necessary harsh corners are chamfered. Just like all of the other Picatinny products we make, we radius between the slots, and also radius the corners of the lugs to prevent any snag areas and give it a cleaner look.
- Comes with stainless recoil pin to work with receivers that have the hole available, rail will still work on those that do not
- As with our 700 rails, all screws are T10 Torx and the same length so no guessing which goes where
- The MOA angle of the base is guaranteed to be true to the spec due to advanced fixturing
- Machined to MIL-STD-1913
- Type III Hardcoat Black anodized
- Comes with a T10 Torx key
- Screw Torque = 15in/lb
- Fits Tikka T3 and T3X
Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 8.25 × 1 × 1 in |
| Manufacturer | Area 419 |
| MOA | 0 MOA, 20 MOA |
| Style | Full Slotted |
Reviews (73)
Peter D. (verified owner) –
Good rail.
Thomas (verified owner) –
High quality
George K. (verified owner) –
Needed a 20 moa rail and this fit like a glove also bought the muzzle break which arrived today. First class products 100%
Vincent I. (verified owner) –
Fit an finish works as it should!
Julian W. (verified owner) –
The quality of this improved rail is next to none! I was hesitant to buy this because it is a litter more expensive then others, but im sure am glad I did! Super happy with this and will definitely buy again! Worth every penny
Lance H. (verified owner) –
Great product with flawless craftsmanship! Fit my Tikka T3x like it was custom made for it!
Justin Sperry (verified owner) –
Perfect
Nicholas Fox (verified owner) –
Very well machined fits perfectly on my tikka and mates perfectly with the scope rings I’ve bought
Robert (verified owner) –
Excellent rail. I didn’t like the screws. They were soft and seemed easy to strip.
steve spires (verified owner) –
good stuff
Kevin Johnson (verified owner) –
Very impressive quality and workmanship. Fit perfectly. Very happy customer.
Chris (verified owner) –
Great fit and finish. Worked perfect.
David RONCADORI (verified owner) –
Clean design, much nicer than some of the rails we have used in the past.
Brian E. (verified owner) –
Perfect rail!
Marcus M. (verified owner) –
More than satisfactory
Joseph Silva (verified owner) –
perfect
Lance (verified owner) –
Great quality part. As usual.
KEVIN CHASE (verified owner) –
This is an excellent receiver length scope base; it does not protrude over the barrel.
The independent recoil lug has a perfect light press fit into the rail body. This base is a good choice for mounting heavy precision scopes.
Seymour (verified owner) –
The attention to detail is amazing. These guys are pushing the limits of what shooters should expect from parts manufacturers.
Mark M. (verified owner) –
Excellent quality
Michael (verified owner) –
This is my 3rd one. Easy to install. Fit perfectly. No movement whatsoever.
Brady O. (verified owner) –
Great Pic Rail. Fit perfectly. I like that it included a recoil lug. Will definitely buy again for next rifle.
Toby (verified owner) –
As advertised the rail is very well finished and looks great on my 6.5 PRC Roughtech. The recoil lug fits snuggly, so I know it is actually helping to reduce/eliminate shear forces on the 4 mounting screws. My go to rail for heavier recoiling cartridges is a Murphy Precision rail which is considerably heavier but has two additional pins and a 5th screw to take advantage of the T3x action (more than twice the cost and 3x weight). The only reason I gave this rail a 4 star rating is due to the cheap mounting screws supplied. Even at 15 in/lbs I stripped the head on one of the screws and had to drill it out. I replaced these with screws made out of a harder alloy which made a big difference.
Anonymous (verified owner) –
Excellent
craig brown (verified owner) –
Rail fit perfectly and has performed exactly as it should.
Anonymous (verified owner) –
Nicely made part. Hopefully they will make one in the future to include the t3x’s additional locating features.
Charlie Haviland (verified owner) –
The ability to make a rail look and feel the way it does with no squared edges and even include the extra piece to fit in the pocket of the rifle make it worth the extra money for this rail rather than other companies. This is my third rail from AREA 419 and if I need anymore, it will definitely have the AREA419 logo on it.
Anonymous (verified owner) –
Quality piece of equipment, bought from them before and will continue.
Jason (verified owner) –
Fit perfectly and the deburring is so nice
Cliff Christman (verified owner) –
whish it would have the option of the indexing pins
Verified Buyer (verified owner) –
Fit my tikka t3x roughtech ember perfectly
Charlie Haviland (verified owner) –
This is my second rail from AREA 419. Their quality is second to none. I’ve seen other rails that would work, but for me it’s always going to be AREA 419. The attention to detail and leaving no rough or sharp surfaces are important to me. Thanks for making great products across the board AREA 419.
Charlie Haviland
MIchael (verified owner) –
The rail fits perfectly and is easy to install.
Nicholas (verified owner) –
Will definitely not be the last rails I buy from 419
Eric (verified owner) –
Whole rail exudes quality. Fit and finish were perfect.
todd.balestrini (verified owner) –
Hands down the best rail for the Tikka T3x. Unlike other brands I have seen, ALL the edges on this rail are finished and smooth and the contour of the rail matches perfectly with the receiver. Also unlike many other brands, these are made with higher grade 7075 aluminum and not 6061. The only downside is that they did not include a sticker 🙂
Eric G. (verified owner) –
Great build quality and super easy install. Looks amazing on my rifle and am overall happy with this rail.
Vincent Grenier (verified owner) –
Excellent product, love the attention to detail, the recoil lug is a big plus and the deburred edges are a big plus.
Douglas (verified owner) –
Price was in point
Anonymous (verified owner) –
I am looking forward to using this product.
william s. (verified owner) –
No complaints
Kyle Beach (verified owner) –
As described. Great product. Not a rough edge on it. I installed with the pin. The first of many purchases to be made from Area 419. Would recommend them to everyone.
Christer Amundsen (verified owner) –
Great machining, I now want to replace the Picatinny from MDT on all my Tikka`s
Anonymous (verified owner) –
We’ll see. Haven’t installed yet. Looks good so far though!
Ryan D. (verified owner) –
Fit and finish is awesome. Installed easy with no fitment issues. Really like how it has been de horned with no sharp edges anywhere.
Adam F. (verified owner) –
This was a great way to get a 20 MOA rail on my T3X CTR. The factory rail is tricky to take off due to two pins in the factory rail that go into the receiver. Once all the screws were out of the factory rail and it was off just make sure to wipe off the residue on the receiver before installing this Area 419 scope base.
dominic (verified owner) –
excellent fit and finish, love it. Rounded edges no sharp points to catch or snag.
Jim Dooley (verified owner) –
There were two spots on top of the rail where the finish was missing or damaged. Otherwise a nice product.
Hayden H. (verified owner) –
The best Tikka rail on the market
Sean G. (verified owner) –
Quality as always
Anonymous (verified owner) –
Awesome fit and finish! Great rail
Kien (verified owner) –
Fits beautifully, made out of 7075 and comes with an recoil lug, not much more you can ask for if you’re using a rail on a Tikka. A Must Have!
Michael (verified owner) –
Fit perfectly on my Tikka CTR .308.
John Shade (verified owner) –
One of the screw countersink locations was slightly off, required a little time with a small round file to get everything to work
Jaeger Evinger (verified owner) –
Fairly priced
Matthew (verified owner) –
Perfect fit and finish
Garret R. (verified owner) –
This produced worked out great
Damon (verified owner) –
great fit and finish (as expected), really happy
DAVID A. (verified owner) –
Precision machined scope base. Great quality.
Richard B. (verified owner) –
Great fit and finish for my Tikka T3X . The base mounting is rock solid.
Ryan C. (verified owner) –
This rail is as good a quality as it gets. Top notch.
Mike C. (verified owner) –
Excellent fit and finish.
Anonymous (verified owner) –
Perfect fit, high quality product.
Danny K. (verified owner) –
Great product. I purchased this rail for a Tikka T3x Roughteck. The Fit and Finish was perfect. Would highly recommend.
Anonymous (verified owner) –
Perfect Product
Joshua L. (verified owner) –
There’s no better rail out there for the Tikka. The machining and finish are flawless and the radius on the ends match the shape of the receiver perfectly.
James (verified owner) –
I’ve used a lot of different rails on multiple Tikkas over the years but the 419 is by far the best. The low slim profile and fit were dead on !
Justin B. (verified owner) –
Made very well. Thx
Anonymous (verified owner) –
The fit was perfect
CHRISTOPHER (verified owner) –
Super solid piece. It flows well with the gun’s curves. You buy 419 because you want more than just a functional piece – it’s the subtle but thoughtful design behind it. 5 out of 5!
Bill Bakopoulos (verified owner) –
Removing the factory rail was a huge pain. Torch, nylon mallet, and vise grip pliers on the torx key did the trick. The Area 419 rail is beautifully machined and and sits much lower than the factory Tikka Tac A1 rail, so take this into account Tac A1 owners. The lug needed to be gently tapped into the slot with the mallet. Torqued to 15 in lbs and off to the races. I topped the rail with ARC rings (medium height) and a Vortex Razor HD Gen II 4.5-27x. Objective has a few millimeters of clearance. Note: I cannot fit my Defender cover on the objective. So far so good!
Peter (verified owner) –
My factory Tikka rail came bent. I decided to upgrade to the best rail I can find and this is it. Beautiful machining, would definitely buy products from this company in the future. Really love the sleek and rigid design.
Jay –
Great rail. Well machined (no bedding needed), finish was perfect with no rough edges, includes a integrated recoil lug and built out of 7075 aluminum ( higher grade than many others). First Area 419 rail purchase but this is now my first stop for Tikka rails.