Orange Bench Vise Maintenance and Barrel Change – JAW KIT ONLY
$275.00
In stock
THIS IS THE JAW AND BARREL BUSHING KIT ONLY. THERE IS NOT A VISE INCLUDED WITH THIS PURCHASE. FOR THE FULL KIT WITH VISE, GO >> HERE <<
Since the early days of Area 419 we have been using Orange Vise tools in our vertical and now horizontal milling centers. When we realized about a year ago they made a bench vise, we had to have one (or a few?) to go in the shop. When it showed up and was absolutely awesome, we knew one would end up in the Vault, and wanted to find ways to make it perfect for ourselves. These vises come with a 5″ CarveSmart dovetail style jaw set, which we know are meant to be modified – and we ain’t soft.
What we landed on was a jaw set that was able to:
-
- Hold onto ARCALOCK (as well as standard ARCA) rails
- Hold onto Picatinny/1913/Weaver rails
- Hold onto 700-style (and basically all other) bolts
- Incorporate a barrel-bushing system for swapping barrels in and out of receivers
- All the other general vise stuff you might expect
Our barrel bushing kit comes with 4 bushing sets, as well as a storage block:
-
- 1.000″
- 1.200″
- 1.250″
- Universal V-Block, good for .750″ to 1.750″ barrel diameter
We suggest you have a 1/4″ and 5/32″ Hex Key that live on the bench near the vise. The 5/32″ won’t see much use, but the 1/4″ is really handy for positioning.
The Orange Bench Vise applies clamping force linearly based on the position of the handle after a workpiece is gripped:
-
- 1/8 turn: 750 lbs
- 1/4 turn: 1500 lbs
- 3/8 turn: 2250 lbs
- 1/2 turn: 3000 lbs (max)
The maximum force of the vise is limited by the axial load rating of the NTN thrust bearing.
Orange also offers a robust warranty on the vise.
-
- LIFETIME WARRANTY against defects in materials and workmanship
- Accidental Damage Replacement Program – email us for special pricing on replacement components at significantly reduced pricing (50% off for most components except bearings)
When combined with the incredible positional versatility of the Orange Vise, we think it’s the perfect rifle vise kit. Available now, and ONLY here at Area419.com
NOTE: This is NOT your grandpa’s steel Wilton vise that is meant for welding and 2lb steel hammers. It’s a very robust, beautiful, consistent, useful vise. It’s not a fab-shop vise. Please, don’t do anything stupid.
| Weight | 8 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Clint W. (verified owner) –
Great vise!
Michael B. (verified owner) –
Total perfection and the perfect complement to the Orange Vise! Keep up the great work!
Greg Gibbs (verified owner) –
Absolutely love the Jaw kit !!!
Jeffery Stevens (verified owner) –
This pkg I was in serious anticipation to get into my hands.
Product was on back order and really did not know if it would be produced again.
Got on the list and got the notification the other day.
The 419 armors jaw kit for the Orange vise.
It just completed the vise $$$ !
Fit & finish is over the top.
Amazing product, I highly endorse it.
Thanks Area 419 your products are 2nd to none.
Matthew C. (verified owner) –
The jaw kit is a great addition to one of my favorite tools. This will definitely improve handling during bench work on my firearms equipped with rails.
Kyle S. (verified owner) –
Product is amazing, packaging missed the mark on this one though which is not like them at all. Jaws were loose in the box with the bushings getting scratched and dinged. I would really like a bushing for 1.350 so I don’t have to use the vee blocks and a couple common tapers for grabbing farther down the barrel to swap without removing optics would be awesome.
Paul B. (verified owner) –
The greatest addition you could make to your orange bench vise
James H. (verified owner) –
Another magnificent piece of art and precision by Area 419 ! O
Michael S. (verified owner) –
Great Quality. Excellent fit. Expected nothing less form Area 419.
Larry Rankine (verified owner) –
The fit and finish of this add on to the Orange Vise is excellent!
JOHN THERINA (verified owner) –
Amazing quality jaw set!
gedeonbr –
I purchased the kit with the Orange vise as a complete package. This kit changes the vise into a gunsmithing tool that I wish I would have had years ago! Get this kit if you have the vise. Here’s a review I did of the jaw kit/vise on Doc G’s Reloading:
https://www.youtube.com/watch?v=aE65eBPZWH0&t=495s
Raphael Cohen (verified owner) –
Well designed and perfectly machined.
Bart (verified owner) –
I was lucky enough to get these ( the jaws) and find a vice (elsewhere unfortunately) I certainly wish the whole set up would have been available through area 419, but the jaws are superbly machined and I’ve already used them several times for different projects and they are wonderful! Makes me wonder how I did without them! Great work Area 419!
Robert Jensen (verified owner) –
Absolutely love this thing
David M. (verified owner) –
This vise set with jaws is a must for anyone who works on their own firearms! The quality is definitely on par with what we have come to expect from Area 419. The Orange Vise is absolutely amazing too, definitely a perfect fit with the Area 419 accoutrements.